292 models

Fittings and adapters

Flanges, couplers, nozzles and adapters that join one thing to another, sized in the prompt.

Page 8 of 13

3D preview of Liquid Rocket Bell Nozzle (Rao, eps 165)1812.6 × 1812.0 × 3242.0 mmPrecision

Liquid Rocket Bell Nozzle (Rao, eps 165)

I want to design rocket nozzle for liquid engine rocket scales about 3 to 4 meter which has highest efficiency

STEPSTLGLB12 PARAMS
3D preview of Rev G Display Stalk (Flange-Elbow-Barrel)75.0 × 104.9 × 116.0 mmPrecision

Rev G Display Stalk (Flange-Elbow-Barrel)

Every part of Rev G, millimetres. 1 — Flange • 75 long (between the cups) × 64 deep (driver–windscreen) × 4.5 thick • 4 corner holes Ø4.5 (M4 / #8) • Inset 7 from each edge • H

STEPSTLGLB20 PARAMS
3D preview of 1-8 LH to 1/2-28 Male Thread Adapter25.5 × 25.5 × 15.9 mmPrecision

1-8 LH to 1/2-28 Male Thread Adapter

thread adapter. 1-8 left hand thread male to 1/2-28 male. total length is .5 inches. all in sae standard threads.

STEPSTLGLB7 PARAMS
3D preview of Threaded Step-Shaft Stub/Nipple24.0 × 22.0 × 41.5 mmPrecision

Threaded Step-Shaft Stub/Nipple

Subject: 3D model of a rotation symmetric step-shaft fitting (stub/nipple) with axial bored hole and external/internal threads. Dimensions and Geometry Details: * Total length: 44

STEPSTLGLB19 PARAMS
3D preview of Parametric Flanged Bushing60.0 × 60.0 × 40.0 mmPrecision

Parametric Flanged Bushing

// ========================================== // 參數化帶孔法蘭軸套 (Parametric Flanged Bushing) // ========================================== // --- 尺寸參數設定 --- inner_dia = 20; // 內

STEPSTLGLB8 PARAMS
3D preview of Adjustable Miter Bar for SKILSAW SPT99T-01230.0 × 19.0 × 9.2 mmPrecision

Adjustable Miter Bar for SKILSAW SPT99T-01

Create a fully parametric adjustable miter bar for a SKILSAW SPT99T-01, designed for FDM printing in PLA. Dimensions: - Length: 230 mm - Width: 19.0 mm - Height: 9.2 mm - Adjustab

STEPSTLGLB13 PARAMS
3D preview of 1/2-28 to M14 thread adapter18.5 × 16 × 40 mm3D Printing

1/2-28 to M14 thread adapter

thread adapter from 1/2"-28 x M14

STLGLB5 PARAMS
3D preview of 1/2-28 to M14 thread adapter18.5 × 18 × 40 mm3D Printing

1/2-28 to M14 thread adapter

thread adapter from 1/2"-28 (male) x M14 (female)

STLGLB6 PARAMS
3D preview of Cylinder with Flange22.0 × 22.0 × 10.0 mmPrecision

Cylinder with Flange

A cylinder with 14.5mm outer diameter, 12mm inner diameter, 6mm length, attached to a flange with 22mm outer diameter and 4mm length

STEPSTLGLB5 PARAMS
3D preview of RTJ Stub Flange 20in CL900990.9 × 990.6 × 92.2 mmPrecision

RTJ Stub Flange 20in CL900

名称:ROTARY STUB FLANGE 20" CL900 RTJ 零件号:390900001689 总外径=749.70 总厚度=88.70 螺栓节圆直径=855,螺栓孔Ø50.80,数量20 内孔直径=457.20 堆焊Inconel625厚度=3.2;堆焊内径584.2,堆焊外径667 RTJ槽尺寸:槽宽19.10,角度23°,圆角R0.8

STEPSTLGLB14 PARAMS
17.3 × 15 × 26 mm3D Printing

M9x0.75 to 1/2-28 Thread Adapter

I need a m9x.75 to a 1/2 28 adapter

STLGLB10 PARAMS
103.2 × 97.6 × 107.1 mmPrecision

Tapered Drainage Basket

Specifications: * Overall shape: Tapered rectangular prism (open at the top). * Overall height: 99 mm. * Wall thickness: 1.0 mm. * Bottom thickness: 1.5 mm. * Top outside dimensio

STEPSTLGLB13 PARAMS
3D preview of Vacuum Nozzle157.2 × 48.2 × 194.0 mmPrecision

Vacuum Nozzle

Vacuum nozzle

STEPSTLGLB8 PARAMS
165.0 × 150.0 × 221.1 mmPrecision

Rifled Cylinder with Tangential Adapter

Cylinder with an adapter that is a tangential coupling at 45degree with the cylinder that has 30degree degree rifling internally that is 5mm deep and 10mm across throughout the int

STEPSTLGLB10 PARAMS
3D preview of Flange with Recess and Keyway60.0 × 160.0 × 160.0 mmPrecision

Flange with Recess and Keyway

Part B: Flange with Recess Step 1 — Revolved body New Part → sketch on the Front Plane the half-profile through (0, 30), (0, 80), (40, 80), (40, 70), (20, 70), (20, 40), (60, 40),

STEPSTLGLB14 PARAMS
3D preview of Vacuum Glass Scraper Head100.0 × 90.2 × 39.0 mmPrecision

Vacuum Glass Scraper Head

a 100mm glass scraper that is built into a vacuum head so that as you scrape the glass what is scraped flows straight into the vacuum and has a barb fitting for a 12mm internal dia

STEPSTLGLB20 PARAMS
3D preview of Protective Flange Coupling140.0 × 160.0 × 160.0 mmPrecision

Protective Flange Coupling

Create a protective type flange coupling for a 40 mm shaft, featuring an 80 mm hub outer diameter, 60 mm hub length, 160 mm flange outer diameter, 20 mm flange thickness, and four

STEPSTLGLB17 PARAMS
3D preview of Stepped flange bushing16 × 16 × 13 mm3D Printing

Stepped flange bushing

a flange with out diameter of 12mm and inner diameter of 8mm. One end of the flange is wider with an outer diameter of 16mm and an inner diameter of 8mm. The flanged end is 3mm dee

STLGLB5 PARAMS
3D preview of Gutter Cleaning Wand8.9 × 70 × 42.5 mm3D Printing

Gutter Cleaning Wand

i want to make a tool to clean out floor gutters. the opening in the grid is 80mm by 10mm and the height from botom of the gutter to top of the grid is 45mm. so i need a flat curv

STLGLB13 PARAMS
3D preview of Class 150 Steel Flange (200 OD x 50 Bore x 10 THK)200.1 × 200.0 × 10.1 mmPrecision

Class 150 Steel Flange (200 OD x 50 Bore x 10 THK)

Design a steel flange the outer diameter= 200 mm and the inner diameter is 50mm , the thickness is 10 mm , the material is st 37 , flange class 150

STEPSTLGLB7 PARAMS
3D preview of Shafts and Sunk Keys (Exploded Set)166.0 × 30.0 × 90.0 mmPrecision

Shafts and Sunk Keys (Exploded Set)

Part D: Shafts and Sunk Keys Shaft (two required) New Part → sketch a circle ⌀30 → Extrude Blind 90 mm. (65 mm sits inside the coupling; the rest projects for the drawing.) Keyway:

STEPSTLGLB12 PARAMS
34.8 × 21.3 × 5.8 mm3D Printing

Handy Brush Top-Hole Plug v2 (Red and Blue)

Handy Brush top-hole plug v2: hole 11.5 x 20 mm, flange trimmed at the straight tip-end edge so it does not overhang the rounded handle tip. Red and blue copies.

STLGLB14 PARAMS
54 × 187.9 × 155 mm3D Printing

Rounded Extended Concealed-Strap Bracket

Rounded corners and longer support: 7-inch shelf fits inside front stop with 1.7mm clearance, high concealed 0.98-inch strap recess, curved back fitting 18.144-inch column.

STLGLB11 PARAMS
223 × 1200 × 38 mm3D Printing

TILT-X1 Wing, Long Ailerons and Cylinder Nacelles v3

TILT-X1 wing with near full-span two-piece ailerons on each side, and cylindrical tilt nacelles with a flat motor face and flat servo-flange side.

STLGLB6 PARAMS

Showing 24 of 292 models

Show 50 more

Describe a part, get a model

Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.