Fittings and adapters
TILT-X1 Wing, Long Ailerons and Cylinder Nacelles v3
- Bounding box
- 223 × 1200 × 38 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
TILT-X1 wing with near full-span two-piece ailerons on each side, and cylindrical tilt nacelles with a flat motor face and flat servo-flange side.
Parameters
| Name | Value | Range |
|---|---|---|
| Wing chord | 200 mm | 160 – 220 |
| Carbon spar tube outer diameter | 10 mm | 8 – 12 |
| Nacelle tilt: 0 = hover, 90 = forward flight | 90 mm | 0 – 90 |
| Gap between hinge knuckles | 0.5 mm | 0.3 – 0.9 |
| Aileron hinge rod hole, 2 mm carbon rod | 2 mm | 1.8 – 2.4 |
| Socket clearance per side | 0.2 mm | 0.1 – 0.4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Temperature Controller Case with Power Adapter End
resize to fit a temperature controller measuring 110 × 70 × 35 mm, add a end to fit a circled power adapter
D120 Flange
make flange of diameter 120mm with 10mm thickness
Rainwater Fan Spreader Adapter
adapter für Regenwasser mit Rohranschluss 70mm dann 90 grad bogen und fächerauslass mit 200 mm
Y-Tube Adapter 8mm to 2x3mm
I need a y-adapter for some tubing. i want to go from a wide 8mm tube to two smaller 3mm tubes. the entire part should be easily 3d printable#
Weld Neck Flange
Build weld necked flange