Fittings and adapters
Rev G Display Stalk (Flange-Elbow-Barrel)
- Bounding box
- 75.0 × 104.9 × 116.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- September 14, 2026
Download
Free to download and use. See the terms.
The prompt
Every part of Rev G, millimetres. 1 — Flange • 75 long (between the cups) × 64 deep (driver–windscreen) × 4.5 thick • 4 corner holes Ø4.5 (M4 / #8) • Inset 7 from each edge • Hole centres: 61 apart in X, 46 apart in Y (±30.5, ±23.0) • Cable hole Ø20 through the middle 2 — Upright • 18 tall above the flange • Ø64 outside • Cable hole Ø20 inside through the middle • Wall 3.2 3 — Elbow • 40° toward the driver • Centreline radius R42 • Ø64 outside • Ø20 cable tunnel through the bend 4 — Display barrel • Straight length 60 (43 body + 7.2 bezel + connectors) • Ø64 outside • Bezel seat Ø57.6 × 7.2 deep • Body bore Ø52.1 • Back bulkhead with Ø20 cable tunnel Gauge (your calipers) Bezel Ø57.01 × 7.2 · Body Ø51.50 × 43.0 Envelope 75 × 105 × 116 (X × Y × Z) on the 91.12 × 65.33 island. There should be a 20mm hole from flange through the center and bend with the model so that cable management is easy
Parameters
| Name | Value | Range |
|---|---|---|
| Flange Length (X) | 75 mm | 40 – 160 |
| Flange Depth (Y) | 64 mm | 30 – 160 |
| Flange Thickness | 4.5 mm | 2 – 20 |
| Plate Corner Radius | 6 mm | 0 – 15 |
| Corner Hole Dia (M4) | 4.5 mm | 2 – 12 |
| Corner Hole Spacing X | 61 mm | 10 – 140 |
| Corner Hole Spacing Y | 46 mm | 10 – 140 |
| Cable Lead-in Counterbore Dia | 26 mm | 20 – 40 |
| Cable Lead-in Depth | 2 mm | 0 – 4 |
| Upright Height Above Flange | 18 mm | 5 – 80 |
| Cable Hole Dia (through centre) | 20 mm | 8 – 40 |
| Elbow Angle (toward driver) | 40 deg | 10 – 80 |
| Elbow Centreline Radius | 42 mm | 15 – 120 |
| Body Outside Dia (whole stalk) | 64 mm | 30 – 120 |
| Barrel Straight Length | 60 mm | 20 – 200 |
| Bezel Seat Dia | 57.6 mm | 20 – 118 |
| Bezel Seat Depth | 7.2 mm | 1 – 30 |
| Body Bore Dia | 52.1 mm | 15 – 115 |
| Body Bore Depth | 43 mm | 5 – 190 |
| Back Bulkhead Cable Tunnel Dia | 20 mm | 5 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con