21.334.85.8
Loading the interactive model…
Interactive 3D model of Handy Brush Top-Hole Plug v2 (Red and Blue)

Fittings and adapters

Handy Brush Top-Hole Plug v2 (Red and Blue)

1 views
Bounding box
34.8 × 21.3 × 5.8 mm
Engine
3D Printing B-rep
Parameters
14
Published
November 22, 2026

Download

Free to download and use. See the terms.

The prompt

Handy Brush top-hole plug v2: hole 11.5 x 20 mm, flange trimmed at the straight tip-end edge so it does not overhang the rounded handle tip. Red and blue copies.

Parameters

NameValueRange
Hole width, widest point11.5 mm8 – 30
Hole length along the handle20 mm10 – 40
Corner radius at the tip end (flatter, straight end)3 mm0.5 – 7
Corner radius at the rounded end (towards the logo)5.5 mm1 – 10
Wall thickness the plug passes through3 mm1 – 12
Gap per side before ribs (raise if too tight)0.1 mm0 – 0.4
Crush rib height (lower if too tight, raise if loose)0.2 mm0 – 0.6
Crush ribs on each long side2 mm0 – 3
Stem length past the wall2 mm0 – 6
Flange overhang on the sides and the rounded (logo) end1.5 mm0 – 4
Flange overhang at the straight tip end (0 = flush with the stem, negative = pulled back)0 mm-3 – 3
Flange thickness0.8 mm0.6 – 3
Include red copy1 mm0 – 1
Include blue copy1 mm0 – 1

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Handy Brush Top-Hole Plug v2 (Red and Blue) - Free CAD Model (STEP, STL) | TextoCAD