Fittings and adapters
EX250 to VZ21 Short-Runner Turbo Manifold
- Bounding box
- 150 × 221.6 × 86.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
I wish to make an exhaust to turbo manifold. It needs to be as short as possible going from a motorcycle engine of a 2008 ninja 250r into the turbo. These headers do not have to be of equal length. Ninja 250R (EX250) header pipe dimensions vary by model year, with 2008–2012 models using a 1" (25.4 mm) inside diameter (ID) head pipe and 1.5" (38.1 mm) outlet, while 1988–2007 models use a 1.125" (1 1/8" / 28.6 mm) ID head pipe. the turbo in mind is a vz21. The exhaust header to turbo flange sizes are depicted in the image attached.
Parameters
| Name | Value | Range |
|---|---|---|
| Head flange width, X | 50 mm | 40 – 70 |
| Head flange height, Z | 40 mm | 30 – 60 |
| Head flange thickness, Y | 10 mm | 6 – 16 |
| Header port bore | 25.4 mm | 20 – 32 |
| Head flange bolt hole dia | 8.4 mm | 5 – 10 |
| Head bolt offset from port axis | 19 mm | 12 – 22 |
| Port centreline height | 20 mm | 12 – 40 |
| Cylinder port centre spacing | 100 mm | 90 – 110 |
| Runner outside diameter | 30 mm | 26 – 34 |
| Runner 1 merge point Y | 140 mm | 120 – 160 |
| Runner 2 merge point Y | 150 mm | 130 – 180 |
| Merge point height above port | 44 mm | 30 – 60 |
| Collector outlet outside dia | 44 mm | 40 – 56 |
| Collector outlet bore | 38.1 mm | 32 – 44 |
| Merge point to outlet length | 72 mm | 60 – 100 |
| Turbo flange width, X | 70 mm | 55 – 90 |
| Turbo flange height, Z | 45 mm | 35 – 60 |
| Turbo flange thickness, Y | 10 mm | 6 – 16 |
| Turbo flange bolt hole dia | 8.4 mm | 5 – 10 |
| Turbo bolt offset from bore axis | 25 mm | 18 – 32 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Thorlabs SM1T2 Double-Male SM1 Adapter
I need a thorlabs SM1T2 adapter. Its an Sm1 to Sm1 adapter. The threading should be external
Modular Pyramid Rod Section
Design a 3D-printable modular tubular rod section for a portable, modular Great Pyramid of Giza wireframe. DIMENSIONS: - External diameter: 30 mm. - Internal diameter: 22 mm. - Wa
Adaptive back mesh panel
Adaptive mesh for form fitting humans
SM1 to SM1 Male-Male Adapter
I need an SM1 to SM1 threaded adapter. the treads should be external
Laminar Jet Hose Nozzle
I need a 3d printable hose lock compatible water nozzle which produces a laminar jet
