3D preview of Ninja 250R Turbo Manifold
Loading the interactive model…
Interactive 3D model of Ninja 250R Turbo Manifold

Fittings and adapters

Ninja 250R Turbo Manifold

1 views
Bounding box
159 × 235 × 38.1 mm
Engine
3D Printing B-rep
Parameters
21
Published
November 20, 2026

Download

Free to download and use. See the terms.

The prompt

I wish to make an exhaust to turbo manifold. It needs to be as short as possible going from a motorcycle engine of a 2008 ninja 250r into the turbo. These headers do not have to be of equal length. Ninja 250R (EX250) header pipe dimensions vary by model year, with 2008–2012 models using a 1" (25.4 mm) inside diameter (ID) head pipe and 1.5" (38.1 mm) outlet, while 1988–2007 models use a 1.125" (1 1/8" / 28.6 mm) ID head pipe. the turbo in mind is a vz21. The exhaust header to turbo flange sizes are depicted in the image attached.

Parameters

NameValueRange
Exhaust port centre spacing124 mm80 – 180
Head flange width35 mm24 – 60
Head flange height55 mm35 – 80
Head flange thickness10 mm6 – 16
Head port bore25.4 mm18 – 40
Head flange bolt hole dia8.4 mm4 – 12
Head flange bolt spacing40 mm28 – 50
Primary tube outside dia30 mm24 – 45
Primary tube bore25.4 mm18 – 40
Left primary length120 mm80 – 200
Right primary length90 mm60 – 200
Collector length80 mm50 – 140
Inlet offset from centre17 mm10 – 30
Outlet outside dia38.1 mm28 – 60
Collector wall thickness2.3 mm1.2 – 5
Flange width70 mm50 – 110
Flange height45 mm30 – 80
Flange thickness10 mm6 – 16
Turbine inlet port dia36 mm20 – 60
Flange bolt hole dia8.4 mm4 – 12
Bolt hole spacing26 mm12 – 40

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Ninja 250R Turbo Manifold - Free CAD Model (STEP, STL) | TextoCAD