Fittings and adapters
Flanges, couplers, nozzles and adapters that join one thing to another, sized in the prompt.
Page 12 of 13
Combination Lock Housing
Create a circular base, outer diameter 80 mm, height 40 mm, wall thickness 2.2 mm. Inside, place two stacked circular spools on a central axle. Each spool has a 65 mm flange diamet
Rifled Cylinder with Tangential Adapter
Cylinder with an adapter that is a tangential coupling at 45degree with the cylinder that has 30degree degree rifling internally that is 5mm deep and 10mm across throughout the int
Adjustable Two-Piece Silicone Watch Strap
Adjustable silicone strap - Total length: 240 mm - Width: 20 mm - Thickness: 2.5 mm - Adjustment holes: 4 mm diameter - Hole spacing: 8 mm centre-to-centre - Hole count: 8–10 - Buc
Gjutform realistisk dildo 18 cm
Tvådelad gjutform för silikon, så naturlig/realistisk form som möjligt: 18 cm, smalare (38 mm vid huvudet), ovalt tvärsnitt, markerad kant på huvudet, ådror, söm på undersidan, pla
MCP test flange
Adjusted MCP test flange: outer_d=100, bolt_circle_d=80, bolt_count=6
Modular Ion-Exchange Column Assembly
Create a modular ion-exchange column in Onshape with a 60 mm long, 12 mm OD body and a 4 mm central bore, plus removable top and bottom caps, porous resin-retaining frits, and seal
Areca Air Wand - Air Volume (CFD variants)
Adjusted Areca Air Wand - Air Volume (CFD variants): nozzle_d=30
PG13.5 Male to PG9 Female Cable Gland Adapter
I need an adapter for connecting pg9 cable for one side and pg13.5 for the other side make pg13.5 male and pg9 fenale in it
Air Volume V4 junction 110mm
CFD air volume variant: junction 110 mm from mouth, pipe 40 deg, no nozzle.
Flanged Bushing
// ========================================== // 參數化帶孔法蘭軸套 (Parametric Flanged Bushing) // ========================================== // --- 尺寸參數設定 --- inner_dia = 20; // 內
1/2-28 to M14 thread adapter
thread adapter from 1/2"-28 (male) x M14 (female)
Cable Gland Adapter PG13.5 Male to PG9 Female
I need an adapter for connecting pg9 cable for one side and pg13.5 for the other side make pg13.5 male and pg9 fenale in it
Circular Flange
create a standard cirular flange the outer diameter is 100mm and the inner hole diameter 40mm the thickness is 15mm apaceddd 4 bolt holes with a diameter of 8mm equally spaced on
Equal Copper Tee 35 F/F/F (5130000035)
Equal copper tee 35, F/F/F brazed capillary fitting (Lombarda Raccordi 5130000035), three Ø35 female sockets with 24 mm engagement depth, blended junction, STEP export.
MAF25C MR-624 Direct Drive Blower + 250x370 to DN500 Flanged Adapter
Upgrade previously shape-corrected Marvel Air Flow MAF25C 30HP direct-drive blower assembly by adding an IN-LINE HOLLOW stainless rectangular-to-round transition to existing left-f
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Low Loss Header Assembly
Create a 2D orthographic engineering working drawing with full dimension lines for a multi-axis Low Loss Header. - Main Body Barrel: 8-inch (DN200) Red Heavy Pipe, Outside Diameter
Flanged Bushing (法蘭軸套)
參數名稱,說明,預設值 (mm) inner_dia,軸套內徑(軸心配合孔),20 body_outer_dia,主體圓柱外徑,35 body_height,主體總高度,40 flange_dia,底座法蘭外徑,60 flange_thick,法蘭盤厚度,8 hole_dia,固定螺絲孔直徑,5.5 hole_pcd,固定孔分度圓直徑 (PCD),46 ho
Gjutform realistisk dildo 18 cm
Tvådelad gjutform för silikon, så naturlig/realistisk form som möjligt: 18 cm, 38 mm vid huvudet, smalare skaft, markerad kant på huvudet, ådror, söm på undersidan, platt bas för s
Shaft with Keyway and Chamfer
Shaft New Part → sketch a circle ⌀30 → Extrude Blind 90 mm. (65 mm sits inside the coupling; the rest projects for the drawing.) Keyway: sketch on the Top Plane (or on a plane tan
Gjutform realistisk dildo 18 cm
Tvådelad gjutform för silikon, så naturlig/realistisk form som möjligt: 18 cm, 38 mm vid huvudet, smalare skaft, markerad kant på huvudet, ådror, söm på undersidan, platt bas för s
Cylinder Adapter 36-42 mm
Cylinder adapter, converting 36mm inner diameter to 42mm inner diameter with 1/4 inch thickness, 3 inches in length
Gjutform realistisk dildo 18 cm
Tvådelad gjutform för silikon, så naturlig/realistisk form som möjligt: 18 cm, 38 mm vid huvudet, smalare skaft, markerad kant på huvudet, rundad topp, lätt böj, ådror, söm på unde
Collar arms x3 (parts 17-21)
Smart acetabular reamer, parts 17-21: three adjustable collar arms in assembled positions (global coordinates, flange mid-plane at Z302): base carriages (R1), upper links (R2-R3),
Showing 24 of 292 models
Show 50 moreDescribe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.
