Fittings and adapters
Adjustable Two-Piece Silicone Watch Strap
- Bounding box
- 97.2 × 88.2 × 20.3 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 12, 2026
Download
Free to download and use. See the terms.
The prompt
Adjustable silicone strap - Total length: 240 mm - Width: 20 mm - Thickness: 2.5 mm - Adjustment holes: 4 mm diameter - Hole spacing: 8 mm centre-to-centre - Hole count: 8–10 - Buckle pin: 2 mm diameter Make the strap in two pieces, with rounded edges and a curved wrist-fitting shape
Parameters
| Name | Value | Range |
|---|---|---|
| Long Strap Length | 140 mm | 80 – 200 |
| Short Strap Length | 100 mm | 50 – 160 |
| Strap Width | 20 mm | 10 – 40 |
| Strap Thickness | 2.5 mm | 1.5 – 5 |
| Wrist Curve Radius | 45 mm | 25 – 80 |
| Edge Round Radius | 0.7 mm | 0.2 – 1 |
| Adjustment Hole Diameter | 4 mm | 2 – 8 |
| Hole Pitch | 8 mm | 4 – 15 |
| Hole Count | 10 | 4 – 14 |
| First Hole From Tip | 8 mm | 3 – 30 |
| Buckle Pin Diameter | 2 mm | 1 – 4 |
| Pin Inset From Strap End | 6 mm | 2 – 20 |
| Pin Engages Hole # | 4 | 0 – 13 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Assembled Split Y-Pipe Joint with Bolted Flange
i want to join a couple of pypes in these pies are wires i need an y-pipe joint with 50mm inside but it needs to be an split design withan flange were v´can bolt togeter the hole