Fittings and adapters
Circular Flange
- Bounding box
- 100 × 100 × 15 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
create a standard cirular flange the outer diameter is 100mm and the inner hole diameter 40mm the thickness is 15mm apaceddd 4 bolt holes with a diameter of 8mm equally spaced on a bolt circle diameter (BCD) of 80mm add a 3 mm fillet to the outer top and bottom edges
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter | 100 mm | 50 – 300 |
| Inner hole diameter | 40 mm | 10 – 200 |
| Thickness | 15 mm | 5 – 50 |
| Bolt hole diameter | 8 mm | 3 – 20 |
| Bolt circle diameter | 80 mm | 20 – 250 |
| Number of bolt holes | 4 mm | 3 – 12 |
| Outer edge fillet radius | 3 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Pneumatic Cylinder Assembly
parts: Front end cap, Guide bushing, Rear end cap, Cushioning piston, Piston rod, Piston, Cushioning piston, Cylinder barrel, Cylinder flange, Cushioning adjustment screw, and stan
Modular Pyramid Rod Section
Design a 3D-printable modular tubular rod section for a portable, modular Great Pyramid of Giza wireframe. DIMENSIONS: - External diameter: 30 mm. - Internal diameter: 22 mm. - Wa
Adaptive back mesh panel
Adaptive mesh for form fitting humans
Thorlabs SM1T2 Double-Male SM1 Adapter
I need a thorlabs SM1T2 adapter. Its an Sm1 to Sm1 adapter. The threading should be external
SM1 to SM1 Male-Male Adapter
I need an SM1 to SM1 threaded adapter. the treads should be external
