Fittings and adapters
Low Loss Header Assembly
- Bounding box
- 416.4 × 378.3 × 1369.1 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 2D orthographic engineering working drawing with full dimension lines for a multi-axis Low Loss Header. - Main Body Barrel: 8-inch (DN200) Red Heavy Pipe, Outside Diameter 216.3 mm, Wall Thickness 8.18 mm. Total barrel cut length is 1230 mm. - End Connections: Top and bottom barrel edges must be capped with standard DN200 BS4504 PN16 welded flanges. - Nozzle Openings (All dimensions measured straight down from the top edge 0mm mark and all flange faces finish 100mm from pace of DN200 pipe face) : * At 100mm Mark: One DN65 PN16 nozzle on the front face (0 deg) AND one DN80 PN16 nozzle on the rear face (180 deg). * At 400mm Mark: One DN65 PN16 nozzle rotated clockwise to the right-hand face (90 deg). * At 945mm Mark: One DN65 PN16 nozzle rotated clockwise to the right-hand face (90 deg). * At 1245mm Mark: One DN65 PN16 nozzle on the front face (0 deg) AND one DN80 PN16 nozzle on the rear face (180 deg). - Instrumentation: Top DN200 Blank flange requires a central 1/2" BSP connection line. Bottom DN200 Blank flange requires a central 1" BSP connection line. Show clear linear dimension lines tracking center-to-center pitches, total barrel length, and connection diameters.
Parameters
| Name | Value | Range |
|---|---|---|
| Barrel OD | 216.3 mm | 100 – 500 |
| Barrel Wall Thk | 8.18 mm | 2 – 20 |
| Barrel Length | 1230 mm | 200 – 2000 |
| Top Flange OD | 340 mm | 200 – 500 |
| Top Flange Thk | 24 mm | 10 – 50 |
| Top Flange Hole Dia | 20.96 mm | 5 – 50 |
| Bottom Flange OD | 340 mm | 200 – 500 |
| Bottom Flange Thk | 24 mm | 10 – 50 |
| Bottom Flange Hole Dia | 33.25 mm | 5 – 60 |
| Nozzle Standoff | 100 mm | 50 – 200 |
| DN65 Bore | 76 mm | 40 – 90 |
| DN65 Pipe OD | 90 mm | 50 – 120 |
| DN65 Flange OD | 185 mm | 100 – 300 |
| DN65 Flange Thk | 20 mm | 5 – 50 |
| DN80 Bore | 89 mm | 50 – 110 |
| DN80 Pipe OD | 110 mm | 60 – 140 |
| DN80 Flange OD | 200 mm | 120 – 320 |
| DN80 Flange Thk | 20 mm | 5 – 50 |
| Front Top Height | 100 mm | 0 – 2000 |
| Front Top Angle | 0 deg | 0 – 360 |
| Rear Top Height | 100 mm | 0 – 2000 |
| Rear Top Angle | 180 deg | 0 – 360 |
| Right Upper Height | 400 mm | 0 – 2000 |
| Right Upper Angle | 90 deg | 0 – 360 |
| Right Lower Height | 945 mm | 0 – 2000 |
| Right Lower Angle | 90 deg | 0 – 360 |
| Front Lower Height | 1245 mm | 0 – 2000 |
| Front Lower Angle | 0 deg | 0 – 360 |
| Rear Lower Height | 1245 mm | 0 – 2000 |
| Rear Lower Angle | 180 deg | 0 – 360 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con