Fittings and adapters
Air Volume V4 junction 110mm
- Bounding box
- 371.3 × 58.0 × 116.7 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
CFD air volume variant: junction 110 mm from mouth, pipe 40 deg, no nozzle.
Parameters
| Name | Value | Range |
|---|---|---|
| Channel inner width | 58 mm | 45 – 80 |
| Channel inner height | 50 mm | 44 – 70 |
| Wall thickness | 3 mm | 2 – 5 |
| Front length | 140 mm | 110 – 220 |
| Rear length | 150 mm | 80 – 250 |
| Rear slope | 1.5 deg | 0 – 5 |
| Mouth floor height | 7 mm | 5 – 10 |
| Air pipe diameter | 50 mm | 30 – 60 |
| Air pipe angle | 40 deg | 30 – 70 |
| Junction position | 77 mm | 45 – 120 |
| Air pipe length | 60 mm | 40 – 150 |
| Nozzle exit diameter | 50 mm | 20 – 60 |
| Nozzle taper length | 30 mm | 10 – 40 |
| Collector stub length | 80 mm | 40 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Linear Guide Carriage Block
Create a heavy-duty mechanical linear guide carriage block for an inclined spindleless veneer peeling machine. Overall Dimensions: - Length (X-axis): 200 mm - Width (Y-axis): 150
Threaded Step-Shaft Stub/Nipple
Subject: 3D model of a rotation symmetric step-shaft fitting (stub/nipple) with axial bored hole and external/internal threads. Dimensions and Geometry Details: * Total length: 44
Step-Shaft Nipple with Through-Bore
Model_Type: Rotation-symmetric step-shaft fitting (nipple) with a central axial through-hole. Total_Length: 44.0 mm Coordinate_System: X-axis from Left (X=0) to Right (X=44) 1. LE
Rocket Fin Sets - Attached
now make it so that the fins are attatched to the adapters.
Model Rocket Fin Set Assembly
For each fin set, the fins should be connected to the adapter creating an assemble.