Fittings and adapters
Gjutform realistisk dildo 18 cm
- Bounding box
- 96 × 68 × 193 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Tvådelad gjutform för silikon, så naturlig/realistisk form som möjligt: 18 cm, 38 mm vid huvudet, smalare skaft, markerad kant på huvudet, ådror, söm på undersidan, platt bas för sugproppsadapter (Hismith KlicLok).
Parameters
| Name | Value | Range |
|---|---|---|
| Length excl. base | 180 mm | 100 – 250 |
| Diameter at head ridge | 38 mm | 25 – 60 |
| Shaft diameter, fraction of D | 0.9 mm | 0.75 – 1 |
| Upward curve at tip | 8 mm | 0 – 30 |
| Base diameter | 60 mm | 40 – 100 |
| Base thickness | 8 mm | 4 – 15 |
| Vein height above surface | 1.2 mm | 0 – 3 |
| Vein width | 3.2 mm | 1.5 – 6 |
| Underside seam height | 0.5 mm | 0 – 1.5 |
| Mould wall | 4 mm | 2.5 – 8 |
| Flange thickness per half | 8 mm | 5 – 14 |
| Bolt hole, M5=5.5 | 5.5 mm | 3.4 – 8.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Compact Harmonic Drive Reducer (Robot Joint)
请设计一个用于机器人机械臂关节的紧凑型谐波减速器(Harmonic Drive Reducer)三维 CAD 模型。 **一、整体尺寸与结构要求** - 减速器主体外径约 50mm,目标控制在 45–50mm 范围内。 - 总成最大轴向厚度不超过 50mm,包含安装法兰和支撑脚。 - 整体结构紧凑、对称,适合安装在机器人机械臂关节位置。 - 允许在主体外壳
Type-M Compact Jumbo Multi-Flame Heating Nozzle
Create a compact, short, and heavy-duty custom heating nozzle (Type-M oxy-fuel standard) for metal melting, matching the physical proportions of the reference image. Strictly follo
Type-M Oxy-Fuel Heating Nozzle (Copper Head + Brass Hex Body)
Create a 3D CAD model and export it as a STEP file for a custom industrial heating nozzle (Type-M oxy-fuel cutting torch mixing head standard) based on the attached technical drawi
Pneumatic Cylinder Assembly
parts: Front end cap, Guide bushing, Rear end cap, Cushioning piston, Piston rod, Piston, Cushioning piston, Cylinder barrel, Cylinder flange, Cushioning adjustment screw, and stan
Copper Reducer 35 x 22 (Male-Female)
Create a 3D model of a copper pipe reducer, male-to-female (MF), for HVAC and plumbing applications. Technical specifications: - Material: Copper - Male connection: Ø35 mm - Femal
