292 models

Fittings and adapters

Flanges, couplers, nozzles and adapters that join one thing to another, sized in the prompt.

Page 10 of 13

3D preview of Horizontal Photochemical Reactor340.0 × 100.1 × 125.0 mmPrecision

Horizontal Photochemical Reactor

Generate orthographic engineering drawings (Top View, Front View, Right Side View) of a horizontal photochemical reactor. Geometry: • Horizontal cylindrical vessel • Flat circula

STEPSTLGLB31 PARAMS
3D preview of 100mm Flange with 4 M8 Bolt Holes100.0 × 100.0 × 10.0 mmPrecision

100mm Flange with 4 M8 Bolt Holes

create a 100mm flange with 4 M8 bolt holes

STEPSTLGLB7 PARAMS
3D preview of Stepped Hose Adapter2.1 × 2.1 × 3.3 mmPrecision

Stepped Hose Adapter

Create a stepped cylindrical hose adapter with a central stop flange and a continuous through-hole. - Total length: 3.25 inches. - Side A (larger end): Outer diameter 1.875 inches

STEPSTLGLB7 PARAMS
3D preview of Fan Duct Adapter 105x33 to 57x30129.0 × 57.0 × 45.0 mmPrecision

Fan Duct Adapter 105x33 to 57x30

I need to make a fan/air duct adapter from 105mmx33mm to 57mmx30 mm, each end needs to have 20mm of final dimension to act as a sleeve, 5mm for transition between 2 20mm sections.

STEPSTLGLB7 PARAMS
80.0 × 80.0 × 10.0 mmPrecision

MCP test flange

Smoke test of the TextoCAD MCP: simple bolted flange

STEPSTLGLB7 PARAMS
46.0 × 46.0 × 170.0 mmPrecision

Collar core (parts 12-16)

Smart acetabular reamer, parts 12-16 in assembled positions (global coordinates, origin at the very rear of the tool on the shaft axis, +Z forward, +Y up): collar hub with arm-trac

STEPSTLGLB15 PARAMS
31.2 × 27.0 × 75.0 mmPrecision

Type-M Oxy-Fuel Heating Nozzle Assembly

Create a 3D CAD model and export it as a STEP file for a custom industrial heating nozzle (Type-M oxy-fuel cutting torch mixing head standard) based on the attached technical drawi

STEPSTLGLB19 PARAMS
3D preview of Precision V-Block50.0 × 50.0 × 30.0 mmPrecision

Precision V-Block

3D printer nozzle extruding gray filament to build a high-precision mechanical part, smooth camera tilt, high-tech engineering workshop background with soft bokeh

STEPSTLGLB8 PARAMS
3D preview of Low Loss Header Assembly516.4 × 340.0 × 1272.6 mmPrecision

Low Loss Header Assembly

Create a 2D/3D parametric engineering CAD package for a vertical Low Loss Header. - Main Body: 8-inch (DN200) Red Heavy Pipe, Outside Diameter 216.3 mm, Wall Thickness 8.18 mm. Tot

STEPSTLGLB30 PARAMS
80.0 × 21.2 × 14.0 mmPrecision

Picatinny to Dovetail Adapter

Picatny to dovetail adapter

STEPSTLGLB10 PARAMS
3D preview of Copper Reducer 35 x 22 (Male-Female)35.1 × 35.0 × 62.0 mmPrecision

Copper Reducer 35 x 22 (Male-Female)

Create a 3D model of a copper pipe reducer, male-to-female (MF), for HVAC and plumbing applications. Technical specifications: - Material: Copper - Male connection: Ø35 mm - Femal

STEPSTLGLB7 PARAMS
3D preview of Vintage Spanish Photo Frame80.0 × 184.0 × 8.0 mmPrecision

Vintage Spanish Photo Frame

Create a beautiful vintage Spanish antique-style portrait photo frame for a Creality Ender 3 V2 3D printer. The photo opening must fit a photograph measuring exactly 150 mm tall b

STEPSTLGLB15 PARAMS
3D preview of Custom Torx Bolt M8x1.020.0 × 20.0 × 48.0 mmPrecision

Custom Torx Bolt M8x1.0

Custom Torx drive bolt, M8 thread with 1.0mm fine pitch, 40mm length. Features an integrated large flange (20mm diameter, 3mm thick) under the head. Material: stainless steel look.

STEPSTLGLB9 PARAMS
3D preview of Multi-Axis Low Loss Header Assembly516.3 × 428.3 × 1369.1 mmPrecision

Multi-Axis Low Loss Header Assembly

Create a 2D orthographic engineering working drawing with full dimension lines for a multi-axis Low Loss Header. - Main Body Barrel: 8-inch (DN200) Red Heavy Pipe, Outside Diameter

STEPSTLGLB25 PARAMS
42.0 × 16.0 × 16.0 mmPrecision

Transition Fitting

Create the Transition Fitting (Fitting Component) 1. In the assembly menu, click Assemble → New Component and name it Fitting. 2. Select Create Sketch on the XZ (Front) plane. 3. D

STEPSTLGLB16 PARAMS
2720.0 × 2360.0 × 3079.2 mmPrecision

10 kL hot water storage tank - opposite DN50 inlets and bottom DN80 outlet

Create precise parametric vertical 10,000 litre atmospheric hot-water tank, with 2 DN50 horizontal flanged upper sidewall inlets at identical height exactly 180 degrees apart: heat

STEPSTLGLB18 PARAMS
30.0 × 30.0 × 90.0 mmPrecision

Shaft with Keyway

Shaft New Part → sketch a circle ⌀30 → Extrude Blind 90 mm. (65 mm sits inside the coupling; the rest projects for the drawing.) Keyway: sketch on the Top Plane (or on a plane tan

STEPSTLGLB6 PARAMS
3D preview of Funny Female Spray Can Nozzle38 × 38 × 72.7 mm3D Printing

Funny Female Spray Can Nozzle

FUNNY FEMALE SPRAY CAN NOZZLE

STLGLB15 PARAMS
574.1 × 100.1 × 80.1 mmPrecision

Planter Set - 5 Separate Pots (Simplified)

Create ONE STL file containing exactly 5 separate objects arranged side by side: 1 inner pot and 4 decorative outer pots. Inner pot: 70 mm high, 88 mm upper outer diameter, 3 mm w

STEPSTLGLB14 PARAMS
160.0 × 160.0 × 65.0 mmPrecision

S13 to BMW 2-Piece Wheel Spacer Adapter

i need 2piece spacer adapter from s13 nissan 4x114,3 pcd, 66,1mm cb to Bmw 5x120pcd 72,6mm cb. First peace bolts to hub and the other one bolts to that

STEPSTLGLB20 PARAMS
114.0 × 106.0 × 38.3 mmPrecision

Collar arms x3 (parts 17-21)

Smart acetabular reamer, parts 17-21: three adjustable collar arms in assembled positions (global coordinates, flange mid-plane at Z302): base carriages (R1), upper links (R2-R3),

STEPSTLGLB9 PARAMS
96 × 68 × 193 mm3D Printing

Gjutform realistisk dildo 18 cm

Tvådelad gjutform för silikon, så naturlig/realistisk form som möjligt: 18 cm, smalare (38 mm vid huvudet), ovalt tvärsnitt, markerad kant på huvudet, ådror, söm på undersidan, pla

STLGLB13 PARAMS
3D preview of Lip-Held Whistle Body18.1 × 18.1 × 28.0 mmPrecision

Lip-Held Whistle Body

// ======================================================== // COMPACT LIP-HELD WHISTLE CANDY — max whistle strength // Not tuned to a specific frequency — optimized for a // loud

STEPSTLGLB10 PARAMS
223 × 1200 × 38 mm3D Printing

TILT-X1 Wing, Long Ailerons and Cylinder Nacelles v3

TILT-X1 wing with near full-span two-piece ailerons on each side, and cylindrical tilt nacelles with a flat motor face and flat servo-flange side.

STLGLB6 PARAMS

Showing 24 of 292 models

Show 50 more

Describe a part, get a model

Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.