Fittings and adapters
Multi-Axis Low Loss Header Assembly
- Bounding box
- 516.3 × 428.3 × 1369.1 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 2D orthographic engineering working drawing with full dimension lines for a multi-axis Low Loss Header. - Main Body Barrel: 8-inch (DN200) Red Heavy Pipe, Outside Diameter 216.3 mm, Wall Thickness 8.18 mm. Total barrel cut length is 1230 mm. - End Connections: Top and bottom barrel edges must be capped with standard DN200 BS4504 PN16 welded flanges. - Nozzle Openings (All dimensions measured straight down from the top edge 0mm mark): * At 100mm Mark: One DN65 PN16 nozzle on the front face (0 deg) AND one DN80 PN16 nozzle on the rear face (180 deg). * At 400mm Mark: One DN65 PN16 nozzle rotated clockwise to the right-hand face (90 deg). * At 945mm Mark: One DN65 PN16 nozzle rotated clockwise to the right-hand face (90 deg). * At 1245mm Mark: One DN65 PN16 nozzle on the front face (0 deg) AND one DN80 PN16 nozzle on the rear face (180 deg). - Instrumentation: Top DN200 Blank flange requires a central 1/2" BSP connection line. Bottom DN200 Blank flange requires a central 1" BSP connection line. Show clear linear dimension lines tracking center-to-center pitches, total barrel length, and connection diameters.
Parameters
| Name | Value | Range |
|---|---|---|
| Barrel OD | 216.3 mm | 150 – 300 |
| Barrel Wall Thickness | 8.18 mm | 3 – 20 |
| Barrel Length | 1245 mm | 1000 – 2000 |
| Top Flange OD | 340 mm | 200 – 500 |
| Top Flange Thickness | 24 mm | 10 – 50 |
| Top Connection Bore (1/2" BSP) | 15 mm | 5 – 30 |
| Bottom Flange OD | 340 mm | 200 – 500 |
| Bottom Flange Thickness | 24 mm | 10 – 50 |
| Bottom Connection Bore (1" BSP) | 25 mm | 10 – 40 |
| DN65 Flange OD | 185 mm | 120 – 250 |
| DN65 Flange Thickness | 18 mm | 10 – 30 |
| DN65 Stub OD | 76.1 mm | 60 – 90 |
| DN65 Bore | 65 mm | 50 – 80 |
| DN65 Stub Length | 150 mm | 50 – 300 |
| DN80 Flange OD | 200 mm | 140 – 280 |
| DN80 Flange Thickness | 20 mm | 10 – 35 |
| DN80 Stub OD | 88.9 mm | 70 – 105 |
| DN80 Bore | 80 mm | 65 – 95 |
| DN80 Stub Length | 150 mm | 50 – 300 |
| DN65 Nozzle 1 Distance from Top | 100 mm | 0 – 2000 |
| DN80 Nozzle 1 Distance from Top | 100 mm | 0 – 2000 |
| DN65 Nozzle 2 Distance from Top | 400 mm | 0 – 2000 |
| DN65 Nozzle 3 Distance from Top | 945 mm | 0 – 2000 |
| DN65 Nozzle 4 Distance from Top | 1245 mm | 0 – 2000 |
| DN80 Nozzle 2 Distance from Top | 1245 mm | 0 – 2000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con