Fittings and adapters
Horizontal Photochemical Reactor
- Bounding box
- 340.0 × 100.1 × 125.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Generate orthographic engineering drawings (Top View, Front View, Right Side View) of a horizontal photochemical reactor. Geometry: • Horizontal cylindrical vessel • Flat circular end caps • Central rotating shaft • Four circular impellers equally spaced • Left inlet flange • Right outlet flange • One top feed nozzle near the inlet • Two bottom supports • Inner quartz glass tube • Top linear LED light • Bottom linear LED light • Central linear UV light Requirements: - Symmetric about the center axis - Engineering line drawing - Hidden edges shown as dashed lines - No perspective - No dimensions - Black-and-white CAD drafting style
Parameters
| Name | Value | Range |
|---|---|---|
| Vessel Outer Diameter | 100 mm | 50 – 500 |
| Vessel Wall Thickness | 5 mm | 1 – 20 |
| Vessel Length | 300 mm | 100 – 1000 |
| End Cap Thickness | 5 mm | 1 – 20 |
| Quartz Tube OD | 40 mm | 10 – 200 |
| Quartz Wall Thickness | 2 mm | 1 – 10 |
| Shaft Radial Gap | 1 mm | 0.5 – 10 |
| Shaft Tube OD | 50 mm | 30 – 200 |
| Shaft Tube Wall | 4 mm | 1 – 10 |
| Impeller Radial Gap | 1 mm | 0.5 – 10 |
| Impeller Count | 4 | 2 – 8 |
| Impeller Thickness | 3 mm | 1 – 15 |
| Inlet Flange OD | 20 mm | 10 – 50 |
| Inlet Flange Length | 15 mm | 5 – 50 |
| Inlet Flange Offset | 30 mm | 0 – 45 |
| Inlet Flange Bore | 10 mm | 2 – 48 |
| Outlet Flange OD | 20 mm | 10 – 50 |
| Outlet Flange Length | 15 mm | 5 – 50 |
| Outlet Flange Offset | 30 mm | 0 – 45 |
| Outlet Flange Bore | 10 mm | 2 – 48 |
| Feed Nozzle OD | 15 mm | 5 – 40 |
| Feed Nozzle Length | 10 mm | 5 – 30 |
| Feed Nozzle Position from Left | 30 mm | 0 – 290 |
| Feed Nozzle Bore | 8 mm | 2 – 38 |
| Support Foot Length | 20 mm | 10 – 100 |
| Support Foot Height | 15 mm | 5 – 50 |
| Top LED Height | 5 mm | 1 – 20 |
| Top LED Width | 10 mm | 2 – 50 |
| Bottom LED Height | 5 mm | 1 – 20 |
| Bottom LED Width | 10 mm | 2 – 50 |
| UV Lamp Diameter | 10 mm | 2 – 36 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con