Fittings and adapters
Low Loss Header Assembly
- Bounding box
- 516.4 × 340.0 × 1272.6 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 2D/3D parametric engineering CAD package for a vertical Low Loss Header. - Main Body: 8-inch (DN200) Red Heavy Pipe, Outside Diameter 216.3 mm, Wall Thickness 8.18 mm. Total barrel length is 1230 mm. - End Connections: Top and bottom capped with DN200 BS4504 PN16 flanges. - Port Openings (All measured down from the top edge 0mm mark): * At 100mm: One DN65 PN16 nozzle on the front face (0 deg) AND one DN150 PN16 nozzle on the rear face (180 deg). * At 400mm: One DN65 PN16 nozzle on the front face (0 deg). * At 645mm: One DN65 PN16 nozzle on the front face (0 deg). * At 945mm: One DN65 PN16 nozzle on the front face (0 deg) AND one DN150 PN16 nozzle on the rear face (180 deg). All branches must include standard BS4504 PN16 flange profiles.
Parameters
| Name | Value | Range |
|---|---|---|
| Barrel OD | 216.3 mm | 150 – 500 |
| Wall Thickness | 8.18 mm | 2 – 50 |
| Barrel Length | 1230 mm | 500 – 3000 |
| DN200 Flange OD | 340 mm | 250 – 500 |
| DN200 Flange PCD | 295 mm | 200 – 400 |
| DN200 Bolt Count | 12 | 4 – 24 |
| DN200 Bolt Hole Dia | 22 mm | 10 – 40 |
| DN200 Flange Thickness | 26 mm | 10 – 50 |
| DN65 Flange OD | 185 mm | 120 – 250 |
| DN65 Flange PCD | 145 mm | 100 – 200 |
| DN65 Bolt Count | 4 | 3 – 8 |
| DN65 Bolt Hole Dia | 18 mm | 10 – 30 |
| DN65 Flange Thickness | 18 mm | 10 – 40 |
| DN65 Nozzle OD | 76.1 mm | 50 – 100 |
| DN65 Nozzle Bore | 65 mm | 40 – 80 |
| DN65 Projection | 150 mm | 50 – 300 |
| DN150 Flange OD | 285 mm | 200 – 400 |
| DN150 Flange PCD | 240 mm | 150 – 300 |
| DN150 Bolt Count | 8 | 4 – 12 |
| DN150 Bolt Hole Dia | 22 mm | 10 – 40 |
| DN150 Flange Thickness | 24 mm | 10 – 50 |
| DN150 Nozzle OD | 168.3 mm | 100 – 200 |
| DN150 Nozzle Bore | 150 mm | 100 – 180 |
| DN150 Projection | 150 mm | 50 – 300 |
| Offset Front 100mm | 100 mm | 0 – 2000 |
| Offset Front 400mm | 400 mm | 0 – 2000 |
| Offset Front 645mm | 645 mm | 0 – 2000 |
| Offset Front 945mm | 945 mm | 0 – 2000 |
| Offset Rear 100mm | 100 mm | 0 – 2000 |
| Offset Rear 945mm | 945 mm | 0 – 2000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con