Gears and transmission
Spur gears, sprockets, pulleys and timing components with the tooth counts and modules written into the prompt. Download the STEP file and change the numbers.
856 models matchClear filters
Page 11 of 36
Stepped Pulley Frame
Create a fully constrained 3D CAD model and complete manufacturing documentation for a metal frame for stepped pulleys using the attached reference drawing as the sole dimensional
Hybrid Energy-Harvesting Floor Tile (Exploded Part Set)
Create a clean, simple, realistic 3D CAD-style isometric render of a compact square hybrid energy-harvesting floor tile for human footsteps. The device is a small square platform,
Conveyor Pulley Mounting Bracket
A single heavy-duty conveyor belt pulley mounting bracket. It features a flat rectangular baseplate measuring 150mm by 100mm, with four 10mm countersunk mounting holes at the corne
Stacked Spur Gear Pair 60T + 16T
combined spur gear one over the other, the first is 60 teeth module 1.25 and 14mm thick, the other on top is 16 teeth module 1.75 25mm thick
Hammer Mill – 1 mm Charcoal Powder Version
Hammer mill updated to powderize raw charcoal lump to 1 mm: fine mesh screen with support grid, 6 hammer pins, tighter tip clearance, higher-speed pulley ratio
Automated Waste-Sorting Conveyor Assembly
Camera frame and mount bracket along the width, about a fourth or third of the distance from the start of the conveyor belt, conveyor belt about 1000mm long and 200mm wide with rol
Spur Gear with Integral Hub
Create a detailed 3D CAD model of a small plastic spur gear with an integral cylindrical hub. Units: mm. Gear dimensions Number of teeth: 12, equally spaced every 30°. Tooth-tip ou
Small Watchmakers Lathe with Change Gears
generate me a small watchmakers lathe add features like having the ability to change gears on the lathe to have autofeed, and thread cutting
Vertical Slider Crank Mechanism
Design 3 parts to add a vertical slider-crank mechanism to an existing robot. Existing robot: two parallel vertical guide rods (diameter 8 mm, centre distance 70 mm, along Z) held
Cycloidal Gearbox with Printed Collet and Nut Motor Mount
Cycloidal gearbox for a 24 mm DC motor with printed ring pins (15:1), now with the motor held by a printed collet and nut instead of the split clamp bolt: tapered mouth plus a coar
Bevel Gear 50 mm
create bevel gear dimeter 50 mm
Herbal Shredder & Roller Appliance
Industrial product design CAD model of a compact countertop herbal processing and rolling appliance. The assembly features a vertical gravity-fed architecture with three distinct i
V-Belt Drive Slip and Creep Test Rig
V-belt drive slip/creep analysis rig: two grooved pulleys on a backboard with bearing blocks, motor, belt, strobe/reference discs and a prony brake with hanging weights.
Mini Lathe with Hacksaw-Blade Parting Jig
Simple 3D-printed mini lathe driven by one 24 mm DC motor through a 2:1 gear stage: 608-bearing spindle with a 3-screw bar chuck for 8 mm bar and a tailstock centre for up to 200 m
Long-Range Quadcopter Frame (1100 mm X-Config)
Create a parametric 3D model of a quadcopter frame for long-range cargo missions. The frame is an X-configuration with a wheelbase of 1100 mm (distance between diagonal motor cente
Chemical Processing Demonstration Skid
Create a 3D CAD model of a compact, portable chemical processing demonstration skid on a metal frame, containing the following interconnected process components in a vertical loop
FTC Mecanum Robot Assembly
For this year’s FTC game, we need ideas for what to build on our robot. We are using a goBILDA mecanum chassis. Our robot needs to: - Pick up yellow POLLEN balls - Hold no more t
90° Gear-Driven Airflow Elbow with Valve and Output Wheel
There is tube flow of air, like it should be direct it 90 gradus with gears the mains thing is It controls the flow and also get energy from it and this energy transmits with this
6-Axis Robotic Arm Assembly
Generate a complete 6-axis articulated robotic arm assembly comprising a rectangular base housing dimensions 220 mm long by 180 mm wide with four 6.5 mm corner mounting holes, an i
16-Tooth Helical Gear
16 tooth Helical gear, tooth depth of 11.25, OD of 100mm, Pitch Diameter 90mm, Helix angle 45 degrees. the gear is 30mm thick and has a 25mm bore in the center
Helical Pinion 20T m1.2 with Bored Hub
Create a parametric helical gear with the following specifications: 20 teeth, normal module of 1.2 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a d
MAYFAIR 180W Milk Agitator Gear Motor
Create this motor with the following specs: Here is the cleaned-up, reformatted version: --- ## MAYFAIR Milk Agitator Gear Motor — Nameplate Information The nameplate belongs to
Wastewater Screen Assembly
Mechanical perforated wastewater screen, design based on RP-1200x1700. Perforated rake plate filter belt with chain drive and top mounted gear motor. Installation characteristics:
Two-Stage Spur Gear Reducer 8.04:1
Gear box of 8.04:1 ratio
Showing 24 of 856 models
Show 50 moreDescribe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.
