Gears and transmission
V-Belt Drive Slip and Creep Test Rig
- Bounding box
- 584.0 × 218.0 × 214.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
V-belt drive slip/creep analysis rig: two grooved pulleys on a backboard with bearing blocks, motor, belt, strobe/reference discs and a prony brake with hanging weights.
Parameters
| Name | Value | Range |
|---|---|---|
| Driver pitch radius | 40 mm | 28 – 60 |
| Driven pitch radius | 80 mm | 40 – 110 |
| Centre distance | 300 mm | 220 – 450 |
| Groove included angle (beta) | 36 deg | 32 – 40 |
| Groove width at pitch line | 11 mm | 8 – 14 |
| Pulley rim width | 24 mm | 20 – 32 |
| Hub diameter | 32 mm | 24 – 40 |
| Belt top width | 13 mm | 10 – 13.5 |
| Belt radial height | 8 mm | 6 – 8 |
| Shaft diameter | 14 mm | 10 – 20 |
| Backboard thickness | 12 mm | 8 – 20 |
| Bearing block length | 40 mm | 30 – 60 |
| Motor diameter | 70 mm | 50 – 100 |
| Motor length | 90 mm | 60 – 150 |
| Brake drum diameter | 60 mm | 40 – 80 |
| Brake drum width | 28 mm | 20 – 40 |
| Brake arm length (from shaft) | 200 mm | 120 – 300 |
| Number of weights | 3 | 1 – 6 |
| Weight diameter | 44 mm | 30 – 70 |
| Weight thickness | 8 mm | 4 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
