Loading the interactive model…
Interactive 3D model of Small Watchmakers Lathe with Change GearsGears and transmission
Small Watchmakers Lathe with Change Gears
3 views
- Bounding box
- 320.0 × 80.0 × 119.3 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- September 6, 2026
Download
Free to download and use. See the terms.
The prompt
generate me a small watchmakers lathe add features like having the ability to change gears on the lathe to have autofeed, and thread cutting
Parameters
| Name | Value | Range |
|---|---|---|
| Bed Length | 240 mm | 180 – 350 |
| Bed Width | 80 mm | 60 – 120 |
| Bed Height | 25 mm | 15 – 40 |
| Center Height | 50 mm | 30 – 80 |
| Headstock Length | 60 mm | 40 – 100 |
| Headstock Top Clearance | 30 mm | 20 – 60 |
| Tailstock Length | 50 mm | 30 – 90 |
| Tailstock Top Clearance | 20 mm | 15 – 50 |
| Spindle Diameter | 20 mm | 12 – 35 |
| Spindle Bore | 8 mm | 3 – 15 |
| Shaft Protrusion | 40 mm | 20 – 70 |
| Leadscrew Diameter | 8 mm | 5 – 15 |
| Leadscrew Offset from Front | 20 mm | 10 – 40 |
| Gear Module | 1 mm | 0.5 – 2 |
| Spindle Gear Teeth | 30 teeth | 15 – 60 |
| Idler Gear Teeth | 30 teeth | 15 – 60 |
| Leadscrew Gear Teeth | 30 teeth | 15 – 60 |
| Gear Face Width | 6 mm | 3 – 12 |
| Gear Bore | 5 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
STEPSTLGLB16 PARAMS
Spur Gear (12 Teeth)
Built a gear with 12 teeth
STEPSTLGLB5 PARAMS
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
STEPSTLGLB7 PARAMS