Gears and transmission
Stacked Spur Gear Pair 60T + 16T
- Bounding box
- 77.5 × 77.5 × 39.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- October 10, 2026
Download
Free to download and use. See the terms.
The prompt
combined spur gear one over the other, the first is 60 teeth module 1.25 and 14mm thick, the other on top is 16 teeth module 1.75 25mm thick
Parameters
| Name | Value | Range |
|---|---|---|
| 60T Gear Teeth | 60 teeth | 20 – 120 |
| 60T Gear Module | 1.25 mm | 0.75 – 5 |
| 60T Gear Face Width | 14 mm | 4 – 40 |
| 16T Gear Teeth | 16 teeth | 8 – 40 |
| 16T Gear Module | 1.75 mm | 0.75 – 5 |
| 16T Gear Face Width | 25 mm | 4 – 50 |
| Common Shaft Bore | 12 mm | 4 – 30 |
| Keyway Width | 4 mm | 2 – 10 |
| Keyway Depth | 1.8 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled