Gears and transmission
MAYFAIR 180W Milk Agitator Gear Motor
- Bounding box
- 377.0 × 136.0 × 154.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create this motor with the following specs: Here is the cleaned-up, reformatted version: --- ## MAYFAIR Milk Agitator Gear Motor — Nameplate Information The nameplate belongs to a **MAYFAIR** milk agitator gear motor. ### Motor & Gearbox Specifications | Parameter | Specification | |---|---| | **Brand / Application** | MAYFAIR (Milk Agitation) | | **Model / Serial No.** | 663 | | **Power** | 180 W (~0.24 HP) | | **Voltage** | 220–240 V | | **Phase** | Single Phase | | **Frequency** | 50 Hz | | **Current** | 0.25–0.5 A | | **Motor Speed** | 1440–1500 RPM | | **Gearbox Ratio** | 30:1 (permanently lubricated gears) | | **Output Speed** | 31–32.5 RPM | | **Duty Rating** | Continuous Duty | | **Temperature Rise** | \(30^\circ\text{C} + \text{Ambient}\) | | **Rotation** | Reversible (Clockwise / Anti-Clockwise) | | **Housing Material** | Complete Aluminum Housing | ### Wiring Configuration The motor uses three leads — **1 Red** and **2 Black** — to control direction: - **Common Line:** Red wire - **Clockwise (CW) Rotation:** Connect supply across **Red** and the first **Black** wire (marked **Clock**). - **Anti-Clockwise (CCW) Rotation:** Connect supply across **Red** and the second **Black** wire (marked **Anti Clock**). > **Note:** With a 1440–1500 RPM motor and a 30:1 gear ratio, the theoretical output is 48–50 RPM. The 31–32.5 RPM listed on the nameplate accounts for operating slip/load or an additional internal reduction stage.
Parameters
| Name | Value | Range |
|---|---|---|
| Stator Frame OD | 120 mm | 60 – 200 |
| Stator Frame Length | 160 mm | 80 – 300 |
| Cooling Fin Count | 12 - | 0 – 24 |
| Cooling Fin Thickness | 3 mm | 1 – 8 |
| Cooling Fin Height | 9 mm | 2 – 20 |
| End Bell Thickness | 14 mm | 5 – 30 |
| Fan Cowl Diameter | 104 mm | 60 – 180 |
| Fan Cowl Length | 32 mm | 10 – 70 |
| Terminal Box Length (axial) | 55 mm | 20 – 100 |
| Terminal Box Width | 46 mm | 20 – 100 |
| Terminal Box Height | 30 mm | 12 – 60 |
| Gearbox Width | 96 mm | 50 – 180 |
| Gearbox Height | 96 mm | 50 – 180 |
| Gearbox Length (axial) | 78 mm | 30 – 160 |
| Gearbox Corner Radius | 8 mm | 0 – 25 |
| Output Shaft Boss Diameter | 40 mm | 20 – 90 |
| Output Shaft Boss Length | 12 mm | 2 – 40 |
| Output Shaft Diameter | 14 mm | 6 – 40 |
| Output Shaft Protrusion | 55 mm | 10 – 150 |
| Foot Length (axial) | 34 mm | 12 – 80 |
| Foot Width | 64 mm | 20 – 150 |
| Foot Height | 14 mm | 4 – 40 |
| Foot Blend Into Frame | 6 mm | 2 – 20 |
| Mounting Hole Diameter | 9 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.