Gears and transmission
Wastewater Screen Assembly
- Bounding box
- 4296.4 × 2720.0 × 7049.7 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Mechanical perforated wastewater screen, design based on RP-1200x1700. Perforated rake plate filter belt with chain drive and top mounted gear motor. Installation characteristics: channel width 1200mm, channel depth 1700mm, installation angle to horizon 60 degrees. General dimensions: total length 7965mm, frame width 2720mm, total installed height 3940mm, discharge height 2250mm. Filter belt width 1660mm. Frame, rakes and housing made of stainless steel. Industrial wastewater treatment equipment style, accurate cad dimensions.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Length (along slope) | 7965 mm | 1000 – 12000 |
| Frame Width | 2720 mm | 500 – 5000 |
| Frame Thickness | 150 mm | 20 – 500 |
| Installation Angle to Horizon | 60 deg | 10 – 80 |
| Belt Length | 7965 mm | 1000 – 12000 |
| Belt Width | 1660 mm | 500 – 3000 |
| Belt Thickness (incl. rakes) | 20 mm | 5 – 100 |
| Chain Rail Length | 7965 mm | 1000 – 12000 |
| Chain Rail Width | 40 mm | 10 – 200 |
| Chain Rail Height | 30 mm | 5 – 200 |
| Gear Motor Length | 500 mm | 100 – 1000 |
| Gear Motor Width | 300 mm | 100 – 1000 |
| Gear Motor Height | 400 mm | 100 – 1000 |
| Housing Length | 7900 mm | 1000 – 12000 |
| Housing Width | 1700 mm | 500 – 5000 |
| Housing Height | 400 mm | 50 – 1000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled