Gears and transmission
90° Gear-Driven Airflow Elbow with Valve and Output Wheel
- Bounding box
- 105.0 × 100.0 × 96.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- October 4, 2026
Download
Free to download and use. See the terms.
The prompt
There is tube flow of air, like it should be direct it 90 gradus with gears the mains thing is It controls the flow and also get energy from it and this energy transmits with this gears output of the gears connected to shaft and shaft rounds big wheel
Parameters
| Name | Value | Range |
|---|---|---|
| Duct inner diameter | 40 mm | 10 – 100 |
| Wall thickness | 3 mm | 1 – 10 |
| Leg length | 50 mm | 20 – 150 |
| Flange outer diameter | 60 mm | 40 – 120 |
| Flange thickness | 4 mm | 1 – 10 |
| Valve disc diameter | 39.5 mm | 20 – 60 |
| Valve disc thickness | 3 mm | 1 – 10 |
| Valve position from inlet | 25 mm | 10 – 100 |
| Shaft diameter | 6 mm | 2 – 20 |
| Shaft bottom extension | 12 mm | 0 – 50 |
| Shaft top extension | 10 mm | 0 – 50 |
| Gear module | 2 mm | 0.5 – 5 |
| Gear teeth | 20 | 8 – 60 |
| Gear face width | 8 mm | 2 – 20 |
| Gear clearance above duct | 5 mm | 1 – 20 |
| Wheel outer diameter | 100 mm | 40 – 200 |
| Wheel thickness | 10 mm | 2 – 30 |
| Wheel clearance above gear | 5 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled