Gears and transmission
Chemical Processing Demonstration Skid
- Bounding box
- 450.0 × 350.0 × 750.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D CAD model of a compact, portable chemical processing demonstration skid on a metal frame, containing the following interconnected process components in a vertical loop system: 1. TOP FEED TANK: A 4-liter cylindrical stainless steel tank with a conical bottom and an integrated external heating jacket wrapper. The tank has a top lid and a center bottom outlet. 2. SUCTION LINE & PUMP: A vertical suction line tube connecting the bottom tank outlet down to a compact 24V DC micro-gear pump. 3. INLINE TEMPERATURE SENSOR: An inline block housing a PT100 sensor probe positioned vertically below the pump outlet. 4. HIGH-PRESSURE FLOW CELL BLOCK: A solid 1-inch stainless steel rectangular manifold block connected beneath the temperature sensor. 5. FOSS PROFOSS 2 WR SENSOR HEAD: A cylindrical analytical spectrometer sensor head with a sapphire optical window interface, bolted flush to the side of the 1-inch flow cell block. 6. RETURN LINE: A stainless steel return tube exiting the bottom of the flow cell block and looping back up to a submerged dip tube inlet at the bottom of the top feed tank. 7. SUPPORT FRAME: The entire assembly is mounted inside a rugged, compact metal sheet housing or box frame, supported at the base by four circular rubber vibration damper pads. Output as a highly precise STEP or IGES file with professional, clean mechanical assembly layout.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Width | 400 mm | 200 – 600 |
| Frame Depth | 300 mm | 200 – 500 |
| Frame Height | 300 mm | 200 – 500 |
| Frame Sheet Thickness | 2 mm | 1 – 5 |
| Vibration Pad Diameter | 50 mm | 30 – 80 |
| Vibration Pad Thickness | 10 mm | 5 – 20 |
| Tank Diameter | 150 mm | 100 – 300 |
| Tank Cylinder Height | 250 mm | 150 – 400 |
| Tank Cone Height | 50 mm | 30 – 100 |
| Tube Outer Diameter | 10 mm | 6 – 20 |
| Suction Line Length | 100 mm | 50 – 200 |
| Pump Length (X) | 80 mm | 40 – 120 |
| Pump Width (Y) | 50 mm | 30 – 80 |
| Pump Height (Z) | 50 mm | 30 – 80 |
| Sensor Block Width | 40 mm | 20 – 60 |
| Sensor Block Depth | 40 mm | 20 – 60 |
| Sensor Block Height | 30 mm | 20 – 50 |
| Flow Cell Width | 50 mm | 30 – 80 |
| Flow Cell Depth | 25 mm | 15 – 50 |
| Flow Cell Height | 50 mm | 30 – 80 |
| Sensor Head Diameter | 60 mm | 40 – 100 |
| Sensor Head Length | 80 mm | 50 – 120 |
| Dip Tube Length | 100 mm | 50 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a