149 models

Jigs and fixtures

Drilling jigs, alignment guides, stands and trays for the workshop, generated from a description of the job.

Page 2 of 7

3D preview of XTool F2 business-card fixture base115 × 115 × 5 mm3D Printing

XTool F2 business-card fixture base

Looking to 3d print A screw on base for a business card fixture to be able to engrave them on my xtool f2 laser with a 115x115mm bed. Must hold at least two business cards measurin

STLGLB12 PARAMS
63.9 × 55.9 × 135.1 mm3D Printing

Watch Stand

MAKE ME A WATCH STAND

STLGLB10 PARAMS
3D preview of Spanner Rack 25pc (Packout Drawer)372.5 × 250 × 32.4 mm3D Printing

Spanner Rack 25pc (Packout Drawer)

A spanner rack that can hold all of the spanners in the image and fits in a Milwaukee packout 4 drawer unit.

STLGLB5 PARAMS
3D preview of Dual-Mode Patient Transport Chassis (Exploded)7700 × 1500 × 1371.9 mm3D Printing

Dual-Mode Patient Transport Chassis (Exploded)

3D CAD model of an open 3600x1200 mm dual-configuration patient transport chassis, built from 50x50 mm square steel tubing with 4 rubber wheels, based on image_5.png. Features stan

STLGLB22 PARAMS
3D preview of Vacuum Fixture Block with Plenum and Indexing Pins150 × 150 × 29 mm3D Printing

Vacuum Fixture Block with Plenum and Indexing Pins

Create a rectangular block measuring 150mm width by 150mm length by 19mm thickness. On the top face, extrude a continuous closed groove tracking the perimeter, offset 10mm inward f

STLGLB14 PARAMS
3D preview of Velodrome Track (UCI)417.9 × 280.5 × 22.5 mm3D Printing

Velodrome Track (UCI)

UCI velodrome cycling track, stadium oval, straight length 152mm, inner curve radius 111mm, track width 30mm, 13 deg straight banking, 43 deg curve banking, 2mm thickness, flat bot

STLGLB7 PARAMS
3D preview of Toy Car Display Stand126 × 78 × 31.8 mm3D Printing

Toy Car Display Stand

Oyuncak araba standı

STLGLB13 PARAMS
3D preview of Slim Upright Gaming Console Case200 × 80 × 258.5 mm3D Printing

Slim Upright Gaming Console Case

but slim like a ps4 but standing up right keep the same build slim it down enough to fit in my backpact

STLGLB12 PARAMS
3D preview of Sloped-Floor Enclosure with Rollers, Spray Pipe & Trays816 × 400 × 500 mm3D Printing

Sloped-Floor Enclosure with Rollers, Spray Pipe & Trays

Above the two rollers, add a thin horizontal water spray pipe. Also add an inclined input tray at the front side and a exit tray at the back side.

STLGLB21 PARAMS
470 × 330 × 46 mm3D Printing

Gravity-stabilised serving tray

Compact minimalist gravity-stabilised food serving tray with a flat central platform on a concealed passive two-axis gimbal, pendulum ballast and eddy-current damping.

STLGLB12 PARAMS
68 × 100 × 60 mm3D Printing

Galaxy Z Fold 6 Phone Stand

Phone stand for samsung z fold 6

STLGLB12 PARAMS
3D preview of Xiaomi Redmi 14 Phone Stand94 × 80 × 91.9 mm3D Printing

Xiaomi Redmi 14 Phone Stand

create a phone stand for my xiaomi redmi 14

STLGLB11 PARAMS
3D preview of Roof Access Hatch 800x800 - Hinged, Aluminium, PIR Insulated1020 × 1020 × 366 mm3D Printing

Roof Access Hatch 800x800 - Hinged, Aluminium, PIR Insulated

I want an access hatch door for roof , size is 800x800 , use hinge door, not use hydraulic or others, upstand is there, in rain not go to inside not only rain any thing don't goes

STLGLB22 PARAMS
3D preview of Dodecahedron Construction Plate92 × 92 × 43.7 mm3D Printing

Dodecahedron Construction Plate

1.Maak een cirkel en construeer een zeshoek ABCDEF 2.Teken licht de diagonalen die door het midden gaan. 3.Construeer de middelloodlijn op AD. Noem de punten van de middelloodlijn

STLGLB8 PARAMS
3D preview of UAV Drone Display and Work Stand150 × 170 × 108.8 mm3D Printing

UAV Drone Display and Work Stand

design a stand for this uav drone illustrated in the picture, the stand must feet the drone

STLGLB9 PARAMS
65.0 × 18.0 × 8 mm3D Printing

BOMBARDICUZ Mk I - Printable Suspension Swing Arm

A single flat-printable suspension swing arm prototype for the tracked rover. It has a 6.4 mm pivot clearance hole and a 6.4 mm road-wheel axle hole, reinforced round bosses and a

STLGLB8 PARAMS
3D preview of G1/4 to Luer Lock Adapter14 × 14 × 6.5 mm3D Printing

G1/4 to Luer Lock Adapter

• Corps principal : Dessinez un profil demi-coupe avec les cotes exactes (longueur totale 22,5 mm, alésage interne 4 mm, collerette centrale 14 mm) et utilisez la fonction Révoluti

STLGLB10 PARAMS
3D preview of M6x45 Hex Bolt (Steel)10 × 11.5 × 4 mm3D Printing

M6x45 Hex Bolt (Steel)

Create m6 hex bolt din standard length 45mm material steel

STLGLB5 PARAMS
3D preview of rounded valet tray200 × 150 × 15 mm3D Printing

rounded valet tray

// Valet tray - 200 x 150 x 15 mm, 3D printable, no supports. Units: mm. // Paste into OpenSCAD (2019.05 or newer), render with F6, then export STL. // Base 5 thick. Walls 5 thick,

STLGLB9 PARAMS
3D preview of Built-in Wardrobe 3000x600x2800 (6 Doors)3000 × 599 × 2800 mm3D Printing

Built-in Wardrobe 3000x600x2800 (6 Doors)

Create a 2D CAD architectural elevation and plan drawing of a built-in wardrobe. Overall dimensions: 3000 mm width, 600 mm depth, and 2800 mm height. The front elevation must be di

STLGLB16 PARAMS
30.3 × 37.3 × 34 mm3D Printing

Off-Center Drill Jig

I want you to make a fixture that can drill an off-center hole in a regular cylinder.

STLGLB11 PARAMS
80 × 90 × 68.8 mm3D Printing

Angled Phone Stand

A phone stand with a 70-degree back support, 80mm wide, a 15mm lip at the front to hold the phone, and a flat base 90mm deep, 4mm wall thickness.

STLGLB7 PARAMS
3D preview of Rack and Pinion Front Steering212 × 124 × 76 mm3D Printing

Rack and Pinion Front Steering

make me a streeing system with rack and pinion attatched to a front hub of a tube chassis

STLGLB14 PARAMS
3D preview of Watch Stand with Cushion64 × 100 × 116.2 mm3D Printing

Watch Stand with Cushion

ben saatim için bir stand istiyorum

STLGLB19 PARAMS

Showing 24 of 149 models

Show 50 more

Describe a part, get a model

Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.