Jigs and fixtures
Built-in Wardrobe 3000x600x2800 (6 Doors)
- Bounding box
- 3000 × 599 × 2800 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 2D CAD architectural elevation and plan drawing of a built-in wardrobe. Overall dimensions: 3000 mm width, 600 mm depth, and 2800 mm height. The front elevation must be divided into 6 equal-width hinged doors with a 3 mm reveal gap between each door. Include standard architectural dimension lines, clean lineweights, and a 100 mm bottom plinth/toe-kick.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 3000 mm | 1500 – 4000 |
| Overall depth | 600 mm | 300 – 900 |
| Overall height | 2800 mm | 1200 – 3200 |
| Carcass panel thickness | 18 mm | 12 – 30 |
| Plinth / toe-kick height | 100 mm | 50 – 250 |
| Toe-kick setback from door face | 50 mm | 0 – 150 |
| Number of doors | 6 mm | 2 – 10 |
| Door thickness | 20 mm | 16 – 30 |
| Reveal gap around/between doors | 3 mm | 1 – 12 |
| Door panel height | 2694 mm | 500 – 3000 |
| Fixed shelf height above floor | 1900 mm | 300 – 2700 |
| Shelf depth | 550 mm | 200 – 600 |
| Shelf width | 2940 mm | 500 – 2964 |
| Hanging rail centre above floor | 1800 mm | 300 – 2600 |
| Hanging rail diameter | 25 mm | 15 – 40 |
| Hanging rail length | 2940 mm | 500 – 2964 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
