Loading the interactive model…
Interactive 3D model of Go-Kart Steering Rack AssemblyJigs and fixtures
Go-Kart Steering Rack Assembly
21 views
- Bounding box
- 670.0 × 137.5 × 50.0 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- August 11, 2026
Download
Free to download and use. See the terms.
The prompt
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Length | 300 mm | 200 – 500 |
| Housing Width (Z) | 40 mm | 20 – 100 |
| Housing Height (Y) | 40 mm | 20 – 100 |
| Housing Bore Diameter | 14 mm | 12 – 30 |
| Flange Thickness (Z) | 5 mm | 2 – 10 |
| Flange Bolt Hole Diameter | 5.5 mm | 3 – 10 |
| Rack Bar Length | 300 mm | 100 – 500 |
| Rack Bar Diameter | 12 mm | 8 – 20 |
| Rack Module | 1 mm | 0.5 – 2 |
| Rack Pressure Angle | 20 deg | 14 – 25 |
| Rack Pitch Line Offset (from center) | 5 mm | 2 – 8 |
| Pinion Module | 1 mm | 0.5 – 2 |
| Pinion Teeth | 20 | 10 – 40 |
| Pinion Pressure Angle | 20 deg | 14 – 25 |
| Pinion Shaft Diameter | 12 mm | 6 – 20 |
| Pinion Total Length | 100 mm | 50 – 150 |
| Pinion Gear Face Width | 15 mm | 8 – 30 |
| Tie Rod Total Length | 180 mm | 100 – 300 |
| Tie Rod Diameter | 6 mm | 4 – 12 |
| Socket Length | 20 mm | 10 – 40 |
| Socket Outer Diameter | 16 mm | 10 – 25 |
| Outer End Diameter | 10 mm | 6 – 20 |
| Outer End Length | 15 mm | 8 – 30 |
| Bolt Hole Diameter | 6 mm | 3 – 10 |
| Bracket Length (X) | 30 mm | 20 – 60 |
| Bracket Height (Y) | 60 mm | 30 – 80 |
| Bracket Thickness (Z) | 5 mm | 2 – 10 |
| Bracket Bolt Hole Diameter | 5.5 mm | 3 – 10 |
| Bracket Hole Spacing (Y) | 40 mm | 20 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
STEPSTLGLB10 PARAMS
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
STEPSTLGLB8 PARAMS
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
STEPSTLGLB8 PARAMS