Jigs and fixtures
Watch Stand
- Bounding box
- 63.9 × 55.9 × 135.1 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
MAKE ME A WATCH STAND
Parameters
| Name | Value | Range |
|---|---|---|
| Base width | 90 mm | 50 – 160 |
| Base depth | 80 mm | 40 – 140 |
| Base height | 10 mm | 5 – 25 |
| Post diameter | 14 mm | 8 – 30 |
| Post height | 55 mm | 20 – 120 |
| Angled arm length | 55 mm | 20 – 120 |
| Arm lean from vertical | 25 deg | 0 – 60 |
| Cushion width | 64 mm | 30 – 120 |
| Cushion height | 40 mm | 20 – 90 |
| Cushion thickness | 34 mm | 16 – 70 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
