Jigs and fixtures
XTool F2 business-card fixture base
- Bounding box
- 115 × 115 × 5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Looking to 3d print A screw on base for a business card fixture to be able to engrave them on my xtool f2 laser with a 115x115mm bed. Must hold at least two business cards measuring 86mm x 54mm x 0.8mm. I have the screws but need there to be holes that like up with the pattern for the xtool f2 base and clearance for the screw. They are flat metric computer screws
Parameters
| Name | Value | Range |
|---|---|---|
| Base width / depth | 115 mm | 100 – 120 |
| Base thickness | 5 mm | 3 – 8 |
| Business-card width | 54 mm | 45 – 70 |
| Business-card height | 86 mm | 60 – 100 |
| Business-card thickness | 0.8 mm | 0.4 – 2 |
| Extra gap around each card | 0.2 mm | 0.1 – 0.5 |
| Depth of card pockets | 0.8 mm | 0.4 – 1.5 |
| Screw clearance hole diameter | 3.4 mm | 2.5 – 6 |
| Screw head diameter | 6.5 mm | 4 – 10 |
| Screw head recess depth | 2.5 mm | 1 – 4 |
| Screw-hole X offset from centre | 49 mm | 20 – 55 |
| Screw-hole Y offset from centre | 49 mm | 20 – 55 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
