Jigs and fixtures
Off-Center Drill Jig
- Bounding box
- 30.3 × 37.3 × 34 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
I want you to make a fixture that can drill an off-center hole in a regular cylinder.
Parameters
| Name | Value | Range |
|---|---|---|
| Rod diameter | 20 mm | 5 – 60 |
| Sliding fit clearance | 0.3 mm | 0.1 – 0.6 |
| Drill axis offset from rod axis | 6 mm | -25 – 25 |
| Drill diameter | 5 mm | 1.5 – 13 |
| Guide bore clearance | 0.25 mm | 0.05 – 0.5 |
| Side wall thickness | 5 mm | 3 – 12 |
| Front wall thickness at the guide | 12 mm | 6 – 30 |
| Floor thickness under the rod | 4 mm | 2 – 10 |
| Bore depth from the floor | 30 mm | 10 – 80 |
| Drill axis height above the bore floor | 15 mm | 3 – 80 |
| Clamping screw size | 4 mm | 2.5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs