Jigs and fixtures
Tikka T3/T3x Bore Guide
- Bounding box
- 24.0 × 24.0 × 210.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 4, 2026
Download
Free to download and use. See the terms.
The prompt
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outside diameter: approximately 17.2 mm Main body should be a long, mostly cylindrical hollow tube. The internal cleaning-rod passage should be approximately 8 mm diameter as an initial estimate.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 210 mm | 150 – 300 |
| Body OD | 17.2 mm | 12 – 25 |
| Rod Passage Dia | 8 mm | 5 – 12 |
| Collar OD | 24 mm | 18 – 35 |
| Collar Length | 15 mm | 8 – 30 |
| Front Tip OD | 14 mm | 10 – 17 |
| Front Tip Length | 30 mm | 15 – 60 |
| O-Ring Groove Depth | 1 mm | 0.5 – 2 |
| O-Ring Groove Width | 2.5 mm | 1.5 – 4 |
| O-Ring Position from Front | 10 mm | 5 – 25 |
| End Chamfer | 1 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl