Jigs and fixtures
Sloped-Floor Enclosure with Rollers, Spray Pipe & Trays
- Bounding box
- 816 × 400 × 500 mm
- Engine
- 3D Printing B-rep
- Parameters
- 21
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Above the two rollers, add a thin horizontal water spray pipe. Also add an inclined input tray at the front side and a exit tray at the back side.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length | 600 mm | 100 – 1000 |
| Outer width | 400 mm | 100 – 800 |
| Outer height | 500 mm | 50 – 1000 |
| Wall thickness | 4 mm | 2 – 10 |
| Floor thickness at low end | 6 mm | 3 – 20 |
| Floor slope drop over length | 20 mm | 0 – 100 |
| Drain hole diameter, 0 = none | 25 mm | 0 – 60 |
| Drain hole centre inset from low end | 30 mm | 10 – 100 |
| Roller diameter | 80 mm | 20 – 150 |
| Centre-to-centre spacing | 160 mm | 90 – 400 |
| Gap above highest floor point | 10 mm | 2 – 100 |
| Support block depth into box | 30 mm | 10 – 80 |
| Spray pipe diameter | 16 mm | 6 – 40 |
| Pipe clearance above the rollers | 12 mm | 2 – 80 |
| Nozzle hole diameter | 2.4 mm | 1 – 6 |
| Number of nozzle holes | 5 mm | 1 – 15 |
| Horizontal tray reach outside the box | 110 mm | 40 – 250 |
| Tray incline from horizontal | 45 deg | 20 – 70 |
| Tray plate thickness | 4 mm | 2 – 10 |
| Outer lip height above tray end | 20 mm | 1 – 60 |
| Overlap into end / side walls | 2 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs