Jigs and fixtures
Angled Phone Stand
- Bounding box
- 80 × 90 × 68.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
A phone stand with a 70-degree back support, 80mm wide, a 15mm lip at the front to hold the phone, and a flat base 90mm deep, 4mm wall thickness.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 80 mm | 40 – 150 |
| Base depth | 90 mm | 50 – 160 |
| Wall / base thickness | 4 mm | 1.2 – 8 |
| Front lip height above base | 15 mm | 5 – 40 |
| Back support angle from base | 70 deg | 45 – 85 |
| Back support length | 70 mm | 30 – 120 |
| Back support bottom inset from back edge | 55 mm | 10 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs