Jigs and fixtures
UAV Drone Display and Work Stand
- Bounding box
- 150 × 170 × 108.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
design a stand for this uav drone illustrated in the picture, the stand must feet the drone
Parameters
| Name | Value | Range |
|---|---|---|
| Drone body width between arm brackets | 72 mm | 50 – 110 |
| Distance between front and rear cradle supports | 115 mm | 80 – 180 |
| Elevation height to clear propellers and antennas | 85 mm | 50 – 140 |
| Display tilt angle | 12 deg | 0 – 25 |
| Wall and rib thickness | 4 mm | 2.5 – 8 |
| Retaining lip height to prevent sliding | 10 mm | 6 – 20 |
| Base footprint width | 150 mm | 120 – 220 |
| Base footprint length | 170 mm | 130 – 240 |
| Hardware organizer tray depth | 6 mm | 3 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
