Jigs and fixtures
G1/4 to Luer Lock Adapter
- Bounding box
- 14 × 14 × 6.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
• Corps principal : Dessinez un profil demi-coupe avec les cotes exactes (longueur totale 22,5 mm, alésage interne 4 mm, collerette centrale 14 mm) et utilisez la fonction Révolution. • Filetages standards : Ne modélisez pas les filets à la main. Utilisez l'outil Filetage (Insert > Features > Thread) : • Partie inférieure (8 mm) : Filetage gaz G1/4" (diamètre extérieur mesuré à 16,5 mm). • Partie supérieure (8 mm) : Filetage spécifique Luer Lock ( diamètre intérieur 4,1 mm et diamètre extérieur 7,5 mm).
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 22.5 mm | 20 – 30 |
| Central bore diameter | 4 mm | 3 – 6 |
| Central collar diameter | 14 mm | 10 – 20 |
| Lower G1/4 thread length | 8 mm | 6 – 10 |
| Lower thread outside diameter | 16.5 mm | 12 – 20 |
| Lower thread pitch | 1.34 mm | 0.8 – 2 |
| Upper Luer thread length | 8 mm | 6 – 10 |
| Upper thread outside diameter | 7.5 mm | 6 – 10 |
| Upper thread inside diameter | 4.1 mm | 3.5 – 6 |
| Upper thread pitch | 0.8 mm | 0.5 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
