Jigs and fixtures
Galaxy Z Fold 6 Phone Stand
- Bounding box
- 68 × 100 × 60 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Phone stand for samsung z fold 6
Parameters
| Name | Value | Range |
|---|---|---|
| Stand width | 100 mm | 60 – 180 |
| Footprint depth | 68 mm | 50 – 150 |
| Base plate thickness | 8 mm | 4 – 16 |
| Backrest height | 60 mm | 35 – 120 |
| Phone lean from vertical | 15 deg | 5 – 35 |
| Phone thickness incl. case | 13 mm | 6 – 25 |
| Clearance in front of phone | 1.2 mm | 0.4 – 5 |
| Lip height above base | 12 mm | 5 – 30 |
| Lip thickness | 10 mm | 4 – 25 |
| Lip front inset from front edge | 16 mm | 4 – 60 |
| Charging cable notch width, 0 = off | 16 mm | 0 – 50 |
| Edge chamfer size | 3 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
