Fittings and adapters
Flanges, couplers, nozzles and adapters that join one thing to another, sized in the prompt.
221 models matchClear filters
Page 4 of 10
Flange with Locating Spigot
need a flange with an outside diameter of approximately 400 mm and a thickness of approximately 40 mm. The flange should have a 10 mm high locating spigot (raised face/centering sh
Shafts and Sunk Keys (Exploded Set)
Part D: Shafts and Sunk Keys Shaft (two required) New Part → sketch a circle ⌀30 → Extrude Blind 90 mm. (65 mm sits inside the coupling; the rest projects for the drawing.) Keyway:
Exhaust Hose Adapter Sleeve
Ich möchte einen Adapter aus Kunststoff designen, der auf eine Abluftschlauch einer Mobilen Klimagerät passt. Der Schlauch hat einen Durchmesser von 150mm .
Air Volume V5 nozzle 40mm
CFD air volume variant: 40 mm nozzle exit, pipe 40 deg, junction 77 mm.
CNC Sleeve Adapter with Square Bore
Generate a 3D mechanical part. Create a main vertical cylinder with an outer diameter of 45.0 mm and a total height of 40.0 mm. At the top of this cylinder, add a circular flange l
Inline Intake Whistle Resonator
Create a **3D-printable automotive intake whistle/resonator** designed to fit inside a car's intake tube. It is NOT a real turbocharger and should have no moving parts. Design it
Compact Type-M Heavy-Duty Melting Nozzle
Create a compact, short, and heavy-duty custom heating nozzle (Type-M oxy-fuel standard) for metal melting, matching the physical proportions of the reference image. Strictly follo
Pneumatic Cylinder Assembly
parts: Front end cap, Guide bushing, Rear end cap, Cushioning piston, Piston rod, Piston, Cushioning piston, Cylinder barrel, Cylinder flange, Cushioning adjustment screw, and stan
Fan/Air Duct Adapter
I need to make a fan/air duct adapter from 105mmx33mm to 57mmx30 mm, each end needs to have 20mm of final dimension to act as a sleeve, 5mm for transition between 2 20mm sections.
Low Loss Header Assembly
Create a 2D orthographic engineering working drawing with full dimension lines for a multi-axis Low Loss Header. - Main Body Barrel: 8-inch (DN200) Red Heavy Pipe, Outside Diameter
Air Volume V2 angle 50deg
CFD air volume variant: pipe angle 50 deg, junction 77 mm, no nozzle.
Shaft with Keyway
Shaft New Part → sketch a circle ⌀30 → Extrude Blind 90 mm. (65 mm sits inside the coupling; the rest projects for the drawing.) Keyway: sketch on the Top Plane (or on a plane tan
NATO 40 Female-to-Male Rail Adapter
An y Adapter from Nato 40 female to Nato 40 male
Air Volume V4 junction 110mm
CFD air volume variant: junction 110 mm from mouth, pipe 40 deg, no nozzle.
Compressed Plunger Assembly
Show the rod extended. The pin should move toward the flange and compress the spring.
Gehaeuse Unterschale + Deckel (Fader-Box)
Erstelle ein Gehäuse aus Unterschale mit angedeuteten Montagepunkten für das ESP32-S3, zwei LM2596-Modulen, zwei TB6614FNG, 1 Befestigung für Platine, eine Einbaubuchse DC Power Ja
Threaded/Socketed Pipe Adaptor with O-Ring Flange
add flange and recess for 3.5mm O-ring on threaded male side of hex boss
Elbow-Forearm Scanning Cradle
Design a device that allows the arm and hand to be rigidly supported at the elbow to precisely scan the limb and subsequently develop an immobilization splint.
Rev G Display Stalk (Flange-Elbow-Barrel)
Every part of Rev G, millimetres. 1 — Flange • 75 long (between the cups) × 64 deep (driver–windscreen) × 4.5 thick • 4 corner holes Ø4.5 (M4 / #8) • Inset 7 from each edge • H
SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Custom Torx Bolt M8x1.0
Custom Torx drive bolt, M8 thread with 1.0mm fine pitch, 40mm length. Features an integrated large flange (20mm diameter, 3mm thick) under the head. Material: stainless steel look.
WRD-750 Double-Ridged Waveguide Section with Flanges
Built WRD-750 Double-Ridged Waveguide Section (3 in) (precision). with flanges
10 kL hot water storage tank - opposite DN50 inlets and bottom DN80 outlet
Create precise parametric vertical 10,000 litre atmospheric hot-water tank, with 2 DN50 horizontal flanged upper sidewall inlets at identical height exactly 180 degrees apart: heat
Klann Linkage Leg - Multi-Part Exploded
Create a Klann linkage leg mechanism for a spider robot consisting of crank, rocker, coupler, upper link, lower link, and foot. The mechanism should be optimized for a 350 mm long
Showing 24 of 221 models
Show 50 moreDescribe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.
