Mechanical parts
Shafts, bushings, standoffs, levers and hinges, with the fits and clearances stated in the prompt.
7 models matchClear filters
Clevis pin 25kn
can you make a clevis pin design using the image as reference and use this values for the design P = 25 kN = 25,000 N d = 30 mm (Ø30 f7) t = 24 mm (blade / center lug thickness) b
Six axis articulated arm
Generate a parametric 6-axis articulated robot arm (500 mm reach, 1 kg payload, 3D-printable 4 mm wall thickness) inside a single top-level build(params) function that returns one
Six dof servo arm with swyft hand
Create a 6 degree of freedom arm with a span of approximately 800 millimeters. Must be powered by 12 volt feetech servos. Attached to the end should be a hand controlled with 5 vol
Rebot r601
create a rebot r601 robotic arm
Dihedral roof intake hypercar
design whole cad model of an hyper car with working things it must be openable all the hinges must be working for that car and streering wheel must be working make sure that hyp
Wall screw driver vacuum bot
``` i need an end effector with vaccum gripper and a electric torque driver which maybe working in such a way where the suction holds the circular flat object in a vertical wall wh
4-DOF Robotic Arm (Dynamixel)
Create a robotic arm with 4 dof with proper real motors
Describe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.
