Mechanical parts
Rebot r601
- Bounding box
- 550.5 × 100 × 180 mm
- Engine
- Robotics B-rep
- Parameters
- 6
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
create a rebot r601 robotic arm
Parameters
| Name | Value | Range |
|---|---|---|
| Base height | 60 mm | 20 – 150 |
| Shoulder height above turret | 90 mm | 40 – 250 |
| Upper arm length | 200 mm | 80 – 400 |
| Forearm length | 180 mm | 80 – 400 |
| Wrist roll to pitch offset | 50 mm | 20 – 150 |
| Wrist pitch to tool offset | 50 mm | 20 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.