Mechanical parts
Dihedral roof intake hypercar
- Bounding box
- 5024.3 × 2156 × 1273.9 mm
- Engine
- Robotics B-rep
- Parameters
- 12
- Published
- November 1, 2026
Download
Free to download and use. See the terms.
The prompt
design whole cad model of an hyper car with working things it must be openable all the hinges must be working for that car and streering wheel must be working make sure that hyper car has perfect aerodynamics and futuristic doors (dihedral doors like koniesegg has ) and an air intake system at the top of the roof of the
Parameters
| Name | Value | Range |
|---|---|---|
| Body length | 4650 mm | 3800 – 5400 |
| Body width | 2050 mm | 1700 – 2300 |
| Body height | 1080 mm | 850 – 1300 |
| Wheelbase | 2780 mm | 2300 – 3300 |
| Front axle X | 1480 mm | 1000 – 1900 |
| Track width | 1720 mm | 1400 – 2000 |
| Wheel radius | 355 mm | 280 – 430 |
| Door hinge X | 1950 mm | 1500 – 2600 |
| Door hinge height | 770 mm | 550 – 1050 |
| Front clamshell hinge X | 740 mm | 350 – 1200 |
| Rear cover hinge X | 3640 mm | 3000 – 4400 |
| Roof intake X | 2700 mm | 2000 – 3400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.