Mechanical parts
Shafts, bushings, standoffs, levers and hinges, with the fits and clearances stated in the prompt.
426 models matchClear filters
Page 15 of 18
Helical Compression Spring
A helical compression spring, wire 3mm, mean coil diameter 25mm, 8 active coils, free length 80mm, closed and ground ends.
Round Container with Screw Cap
Round container 39.1 mm inside diameter and 80 mm deep. 1.5mm wall thickness and 2mm thick base. Screw on cap 10mm high with same outside diameter of main tube
Robotic Arm Link (Hub + Clevis)
To generate a robotic arm
Wind-Up Kitchen Timer
wind up 1 minute kitchen timer
RC Rod End
"Create a mechanical rod end for an RC suspension/steering system. It consists of a main cylindrical shaft and an angled head. The main shaft has an outer diameter of 14mm and a l
Hex Bolt M10 x 50
// Tham số bu lông (có thể chỉnh) diameter = 10; // Đường kính thân (mm) length = 50; // Chiều dài thân (mm) head_height = 7; // Chiều cao đầu lục giác (mm) thread_p
FSAE Brake Pedal (mesh-study part)
FSAE-style brake pedal for a mesh convergence study: pivot boss with bore, tapered arm, master-cylinder clevis hole, and a pedal pad with filleted junction.
Hex Bolt with Hex Nut (M8)
A nut bolt
AR-15 Bolt Head
AR-15 Bolt head
Mechanical Lifting Trolley
Design a compact mechanical lifting trolley for a shop. Maximum lifting load: 30 kg. Overall dimensions: 600 mm long, 450 mm wide and 1000 mm high. Lifting platform: 400 mm × 300
Tank Robot Ultrasonic Bumper V2 (32° wings)
Watertight 3-facet 32mm high HC-SR04 bumper, 56mm center 54mm wings at 32deg, 6 bores and snap-fit rear pockets, 80mm tab bolt pitch, gussets.
Chamfered Mounting Plate
move the screw holes so the centre of the hole is 5mm from the corner
Pressure-test threaded plug
pro 3d tisk, priprav zatku s vnitrnim zavitem, musi vydrzet tlak pro profouknuti zachodoveho potrubi, vnejsi prumer sroubu se zavitem je 9mm, vyska je 10mm, stoupani 1mm, vzdaleno
39 mm Airsoft Suppressor (Hollow Tube + Screw-Off Cap)
I want a suppressor for Airsoft. It must be 39mm diameter and 130mm overall length. The bottom must have 14mm ccw threaded hole that goes 10mm deep. The top must be a screw off cap
Two-Blade Aerodynamic Propeller
i want it to be 2 blades only • Diameter: 533.4 mm (21 in) • Pitch: 330.2 mm (13 in) • Blade Count: 2 • Hub / Shaft Diameter: 8 mm
Clothes Folding Machine
crea una maquina que doble ropa, de difirentes modos segun se seleccione y tenga aromatizador lo guarde en el armario y tenga sensor para detectar objetos en el
hex_nut
design area nut model itself
Water Chamber Revision 8mm Side Ports and Support Ribs
Six-point outer footprint exact as user provided. 8mm body, open bottom, 1.6mm walls and top slab, 6.4mm cavity, two 1.2mm support ribs at X18/32 with 5mm bottom clearance, no top
Hooded Launcher with Hopper and Intake
Make it the same as the original I showed you, but replace the flower scoring and vertical lift and hive scoring arm with a pivot and launcher with a hood that helps angle and posi
M8 Hex Socket Set Screw
M8 set screw
Moon Croc Charm
A 3d printable moon charm for a croc shoe
Energy‑Loading Swim Fin Assembly
swimmer's fins with internal elastic energy loading into internal spring as the fin bends while in motion, it releases when movement is reversed to give a force boost akin to the m
Stepped Shaft with Keyway
"Create a stepped cylindrical shaft in C45 steel, length 160 mm, diameter 40 mm, featuring a 12x8 mm parallel keyway slot."
Robotic Finger Phalanx Link
Create a 3D-printable finger phalanx for a robotic hand. Main body is a rectangular block 40 mm long, 15 mm wide, 13 mm thick with all outer edges filleted 1.5 mm. At one end (the
Showing 24 of 426 models
Show 50 moreDescribe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.
