Mechanical parts
FSAE Brake Pedal (mesh-study part)
- Bounding box
- 34.0 × 70.0 × 286.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
FSAE-style brake pedal for a mesh convergence study: pivot boss with bore, tapered arm, master-cylinder clevis hole, and a pedal pad with filleted junction.
Parameters
| Name | Value | Range |
|---|---|---|
| Pivot to pad centre | 240 mm | 180 – 300 |
| Arm thickness | 10 mm | 6 – 16 |
| Arm front face offset (x) | 12 mm | 8 – 16 |
| Arm back offset at pivot | 16 mm | 12 – 22 |
| Arm back offset at pad | 12 mm | 8 – 16 |
| Pivot boss outer diameter | 32 mm | 24 – 44 |
| Pivot bore diameter | 10 mm | 6 – 14 |
| Pivot boss width | 16 mm | 10 – 24 |
| Pivot to pushrod hole | 70 mm | 50 – 110 |
| Pushrod hole diameter | 8 mm | 6 – 12 |
| Pushrod boss diameter | 22 mm | 16 – 26 |
| Pad width | 70 mm | 50 – 90 |
| Pad height | 60 mm | 40 – 80 |
| Pad thickness | 6 mm | 4 – 10 |
| Pad-arm junction fillet | 3 mm | 1 – 4 |
| Pad corner fillet | 8 mm | 2 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.