Mechanical parts
39 mm Airsoft Suppressor (Hollow Tube + Screw-Off Cap)
- Bounding box
- 39.0 × 39.0 × 130.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- October 10, 2026
Download
Free to download and use. See the terms.
The prompt
I want a suppressor for Airsoft. It must be 39mm diameter and 130mm overall length. The bottom must have 14mm ccw threaded hole that goes 10mm deep. The top must be a screw off cap and the cap depth should be around 5mm not including threads. Also the model must be hollow.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Outer Diameter | 39 mm | 20 – 60 |
| Body Length | 125 mm | 60 – 250 |
| Internal Cavity Diameter | 30 mm | 8 – 45 |
| Bottom Boss Thickness | 12 mm | 6 – 60 |
| Top Thread Neck Diameter | 35 mm | 12 – 56 |
| Top Thread Neck Length | 15 mm | 4 – 60 |
| Mounting Hole Diameter (14 mm CCW) | 14 mm | 5 – 30 |
| Mounting Hole Depth | 10 mm | 3 – 40 |
| Cap Overall Height | 8 mm | 3 – 25 |
| Cap Closed Roof Thickness | 2 mm | 0.5 – 8 |
| Cap Thread Overlap | 3 mm | 0.5 – 15 |
| Cap/Neck Thread Interference | 0.3 mm | 0.05 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.