Fittings and adapters
Flanges, couplers, nozzles and adapters that join one thing to another, sized in the prompt.
71 models matchClear filters
Page 3 of 3
1in Tool to 3/4in Hose Adapter
Create an adapter that can bridge a 1 inch ID tool to a .75 inch id flexible hose
Gjutform realistisk dildo 18 cm
Tvådelad gjutform för silikon, så naturlig/realistisk form som möjligt: 18 cm, smalare (38 mm vid huvudet), ovalt tvärsnitt, markerad kant på huvudet, ådror, söm på undersidan, pla
Gutter Cleaning Wand
i want to make a tool to clean out floor gutters. the opening in the grid is 80mm by 10mm and the height from botom of the gutter to top of the grid is 45mm. so i need a flat curv
G1/8 to V8 Adapter
An 14 mm long adapter with a male G 1/8" external thread and a female V8 internal thread (standard tire valve cap thread).
Huawei Band Whoop Strap Adapter
i want to make whoop adapter for my huawei band 11 pro
Rocket Fin Sets - Attached
now make it so that the fins are attatched to the adapters.
Father Cradling Newborn Bust
Usa esta fotografia como referência principal. Preserva a pose do pai com a bebé ao colo, o formato do rosto, cabelo encaracolado, óculos e manta. Cria uma estatueta com formas nat
DN700 PN40 Flanged Pipe Stub (scaled)
Flanged pipeline DN 700 PN 40 width 15 mm
Funny Female Spray Can Nozzle
FUNNY FEMALE SPRAY CAN NOZZLE
3in V-Band Female Heatsink Flange
Can you create me a vband heatsink using vibrant 3in vbands dimensions? The heatsink should be the female side of the vband and should have a heatsink designed to draw heat out of
Miniature Electric Arc Furnace
Keep everything identical, just make two tiny visual fixes: 1) Add a sphere elbow joint at the 90-degree corner of the gray fume exhaust pipe so the vertical and horizontal tubes c
Dolt Biltema-fäste för DeWalt DCB1104-QW
Alternativ B: låg adapter med 114 mm mellan laddarens upphängningsskruvar, infällda M4-muttrar och fyra försänkta tavelfästen.
Huawei Band 11 WHOOP Strap Adapter
i want to make whoop adapter for my huawei band 11
Rounded Extended Concealed-Strap Bracket
Rounded corners and longer support: 7-inch shelf fits inside front stop with 1.7mm clearance, high concealed 0.98-inch strap recess, curved back fitting 18.144-inch column.
Gjutform realistisk dildo 18 cm
Tvådelad gjutform för silikon, så naturlig/realistisk form som möjligt: 18 cm, 38 mm vid huvudet, smalare skaft, markerad kant på huvudet, ådror, söm på undersidan, platt bas för s
PG13.5 Male to PG9 Female Cable Gland Adapter
I need an adapter for connecting pg9 cable for one side and pg13.5 for the other side make pg13.5 male and pg9 fenale in it
Cable Gland Adapter PG13.5 Male to PG9 Female
I need an adapter for connecting pg9 cable for one side and pg13.5 for the other side make pg13.5 male and pg9 fenale in it
PG13.5 Male to PG9 Female Cable Gland Adapter
I need an adapter for connecting pg9 cable for one side and pg13.5 for the other side make pg13.5 male and pg9 fenale in it
Circular Flange
create a standard cirular flange the outer diameter is 100mm and the inner hole diameter 40mm the thickness is 15mm apaceddd 4 bolt holes with a diameter of 8mm equally spaced on
Gjutform realistisk dildo 18 cm
Tvådelad gjutform för silikon, så naturlig/realistisk form som möjligt: 18 cm, 38 mm vid huvudet, smalare skaft, markerad kant på huvudet, ådror, söm på undersidan, platt bas för s
Gjutform realistisk dildo 18 cm
Tvådelad gjutform för silikon, så naturlig/realistisk form som möjligt: 18 cm, 38 mm vid huvudet, smalare skaft, markerad kant på huvudet, ådror, söm på undersidan, platt bas för s
Miniature Electric Arc Furnace (Cutaway Exhibition Model)
Keep everything identical, just increase the diameter of the sphere joint at the 90-degree elbow corner of the gray fume exhaust pipe to match the exact outer diameter of the pipe
Gjutform realistisk dildo 18 cm
Tvådelad gjutform för silikon, så naturlig/realistisk form som möjligt: 18 cm, 38 mm vid huvudet, smalare skaft, markerad kant på huvudet, rundad topp, lätt böj, ådror, söm på unde
Describe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.
