Fittings and adapters
PG13.5 Male to PG9 Female Cable Gland Adapter
- Bounding box
- 27.7 × 24 × 16 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
I need an adapter for connecting pg9 cable for one side and pg13.5 for the other side make pg13.5 male and pg9 fenale in it
Parameters
| Name | Value | Range |
|---|---|---|
| PG13.5 male thread length | 9 mm | 6 – 15 |
| Hexagonal collar height | 7 mm | 5 – 12 |
| Hex wrench size across flats | 24 mm | 22 – 30 |
| PG9 female thread depth | 11 mm | 6 – 15 |
| Internal cable pass-through hole diameter | 9.5 mm | 6 – 12 |
| Thread clearance offset | 0.25 mm | 0.1 – 0.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Temperature Controller Case with Power Adapter End
resize to fit a temperature controller measuring 110 × 70 × 35 mm, add a end to fit a circled power adapter
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
90 Degree Elbow with Perpendicular Cross Holes
elbow 90 degree to it with a length one side 20 other side 30 width 20 and on both sides in the center a perpendicular hole to it.
D120 Flange
make flange of diameter 120mm with 10mm thickness