Fittings and adapters
Miniature Electric Arc Furnace (Cutaway Exhibition Model)
- Bounding box
- 149.5 × 145 × 198 mm
- Engine
- 3D Printing B-rep
- Parameters
- 47
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Keep everything identical, just increase the diameter of the sphere joint at the 90-degree elbow corner of the gray fume exhaust pipe to match the exact outer diameter of the pipe (and center it right at the intersection of the vertical and horizontal tubes) so the corner looks completely smooth and seamless.
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate side | 140 mm | 80 – 220 |
| Base plate thickness | 8 mm | 4 – 20 |
| Base plate corner radius | 4 mm | 0 – 15 |
| Shell outer diameter | 100 mm | 50 – 180 |
| Shell height | 110 mm | 50 – 220 |
| Shell wall thickness | 6 mm | 2 – 12 |
| Shell floor thickness | 8 mm | 3 – 20 |
| Shell bottom above base plate | 20 mm | 5 – 60 |
| Spout outward length | 25 mm | 8 – 50 |
| Spout half angle | 15 deg | 8 – 35 |
| Spout lip drop | 7 mm | 2 – 20 |
| Spout height at shell | 12 mm | 5 – 25 |
| Cutaway opening arc angle across front | 180 deg | 90 – 220 |
| Top rim height below lid | 12 mm | 2 – 30 |
| Number of shell rings | 4 mm | 2 – 6 |
| Ring outward width | 3.5 mm | 1 – 8 |
| Ring height | 4 mm | 1 – 8 |
| Lid diameter | 104 mm | 70 – 200 |
| Lid thickness | 15 mm | 6 – 40 |
| Lid dome rise | 5 mm | 0 – 12 |
| Lid hole diameter | 11 mm | 4 – 20 |
| Lid hole circle diameter | 44 mm | 20 – 80 |
| Exhaust duct outer diameter | 16 mm | 10 – 30 |
| Exhaust duct inner diameter | 12 mm | 6 – 26 |
| Exhaust vertical rise | 28 mm | 15 – 60 |
| Exhaust horizontal reach | 32 mm | 15 – 60 |
| Stand height above plate | 90 mm | 40 – 160 |
| Stand centre spacing | 110 mm | 60 – 180 |
| Stand thickness | 16 mm | 6 – 30 |
| Stand depth | 60 mm | 20 – 120 |
| Cylinder body diameter | 11 mm | 6 – 20 |
| Piston rod diameter | 6 mm | 3 – 12 |
| Transformer width | 28 mm | 15 – 45 |
| Transformer depth | 24 mm | 15 – 45 |
| Transformer height | 34 mm | 15 – 60 |
| Number of cooling fins | 5 mm | 2 – 10 |
| Cooling fin depth | 3.5 mm | 1 – 8 |
| Mast height above plate | 190 mm | 80 – 260 |
| Mast column diameter | 16 mm | 8 – 40 |
| Arm length from mast axis | 60 mm | 40 – 200 |
| Arm width | 16 mm | 6 – 40 |
| Arm thickness | 10 mm | 4 – 30 |
| Arm clearance above lid | 35 mm | 1 – 80 |
| Holder plate diameter | 76 mm | 30 – 140 |
| Holder plate thickness | 10 mm | 4 – 30 |
| Electrode rod diameter | 10 mm | 4 – 20 |
| Electrode rod length | 140 mm | 60 – 250 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Pneumatic Cylinder Assembly
parts: Front end cap, Guide bushing, Rear end cap, Cushioning piston, Piston rod, Piston, Cushioning piston, Cylinder barrel, Cylinder flange, Cushioning adjustment screw, and stan
Thorlabs SM1T2 Double-Male SM1 Adapter
I need a thorlabs SM1T2 adapter. Its an Sm1 to Sm1 adapter. The threading should be external
Modular Pyramid Rod Section
Design a 3D-printable modular tubular rod section for a portable, modular Great Pyramid of Giza wireframe. DIMENSIONS: - External diameter: 30 mm. - Internal diameter: 22 mm. - Wa
Adaptive back mesh panel
Adaptive mesh for form fitting humans
SM1 to SM1 Male-Male Adapter
I need an SM1 to SM1 threaded adapter. the treads should be external
