Fittings and adapters
Father Cradling Newborn Bust
- Bounding box
- 135.9 × 111.5 × 184.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 4
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Usa esta fotografia como referência principal. Preserva a pose do pai com a bebé ao colo, o formato do rosto, cabelo encaracolado, óculos e manta. Cria uma estatueta com formas naturais, simplificando as zonas não visíveis e reforçando os detalhes frágeis para impressão. Pretendo 180 mm de altura e quatro regiões de material: cabelo/óculos escuros, pele, camisola branca e manta rosa. Exporta em 3MF com regiões de cor separadas para Bambu A1 com AMS Lite e nozzle de 0,2 mm. Se não conseguires exportar as regiões por cor, indica essa limitação.
Parameters
| Name | Value | Range |
|---|---|---|
| Total height | 180 mm | 150 – 220 |
| Plinth height | 8 mm | 5 – 15 |
| Plinth length | 115 mm | 90 – 150 |
| Plinth width | 95 mm | 70 – 130 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Under Door Split AC Exhaust Adapter
I have a portable AC unit I want to use in my garage. i want to use an under the door style adapter. Source Image 1 (Front - under door rectangular): Height is 1.5 inch (convert
Inline Hose Adapter with Sensor Boss
Create a cylindrical inline hose adapter tube for automotive cooling. Total length is 65mm. The main central body is a cylinder with an outer diameter of 20mm and a length of 25mm.
Gutter Cleaning Wand
i want to make a tool to clean out floor gutters. the opening in the grid is 80mm by 10mm and the height from botom of the gutter to top of the grid is 45mm. so i need a flat curv
1in Tool to 3/4in Hose Adapter
Create an adapter that can bridge a 1 inch ID tool to a .75 inch id flexible hose
Compact Harmonic Drive Reducer (Robot Joint)
请设计一个用于机器人机械臂关节的紧凑型谐波减速器(Harmonic Drive Reducer)三维 CAD 模型。 **一、整体尺寸与结构要求** - 减速器主体外径约 50mm,目标控制在 45–50mm 范围内。 - 总成最大轴向厚度不超过 50mm,包含安装法兰和支撑脚。 - 整体结构紧凑、对称,适合安装在机器人机械臂关节位置。 - 允许在主体外壳
