Fittings and adapters
Huawei Band 11 WHOOP Strap Adapter
- Bounding box
- 63.3 × 31.3 × 13 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
i want to make whoop adapter for my huawei band 11
Parameters
| Name | Value | Range |
|---|---|---|
| Tracker body length | 43.5 mm | 25 – 70 |
| Tracker body width | 25.5 mm | 15 – 45 |
| Tracker body thickness | 10 mm | 5 – 18 |
| Pocket clearance per side | 0.4 mm | 0.2 – 1 |
| Snap lip engagement | 0.8 mm | 0.4 – 2 |
| WHOOP strap width | 21 mm | 12 – 32 |
| WHOOP strap thickness | 2 mm | 1 – 5 |
| Strap flange length | 7 mm | 4 – 14 |
| Floor thickness | 2 mm | 1.2 – 5 |
| Side wall thickness | 2.5 mm | 1.2 – 6 |
| Corner radius | 3 mm | 0 – 8 |
| Sensor window length (mm, 0 = none) | 22 mm | 0 – 40 |
| Sensor window width (mm, 0 = none) | 14 mm | 0 – 28 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Two-Loop Tesla Valve Fan Manifold
$fn=40; // WIFCO Tesla Valve Fan Prototype // Units: mm // PART: 0=lower, 1=upper, 2=fan adapter PART=0; L=220; W=224; H=150; S=75; module path(p,r=7){ for(i=[0:len(p)-2]) hul
Ninja 250R Turbo Manifold
I wish to make an exhaust to turbo manifold. It needs to be as short as possible going from a motorcycle engine of a 2008 ninja 250r into the turbo. These headers do not have to b
Bushed pin flanged coupling assembly
i want that bushed pin type flanged coupling as a assembly file.... please the measurement and design that assembly...ask me what else you want from me
EX250 to VZ21 Short-Runner Turbo Manifold
I wish to make an exhaust to turbo manifold. It needs to be as short as possible going from a motorcycle engine of a 2008 ninja 250r into the turbo. These headers do not have to b
Arduino Uno + ST7789 Case
Bikinin casing Arduino uno clone dan ST7789 agar tidak kelihatan Berceceran kabel Bikin ada lobang buat USB Arduino dan DC Arduino Bikin non Paku dan bikin Primt able nozzle 0.4mm
