Mechanical parts
Shafts, bushings, standoffs, levers and hinges, with the fits and clearances stated in the prompt.
426 models matchClear filters
Page 18 of 18
Socket Head Cap Screw
A socket head cap screw. It has a cylindrical head with a diameter of 14.4 mm and a height of 10 mm. Extending from the bottom of the head is a long cylindrical shaft with a diamet
Spin-Only Lathe for 1-3 mm Bar (all 3 mm rod and 683 bearings)
Spin-only 1-3 mm bar lathe rebuilt entirely around 3 mm aluminum rod and 683 bearings instead of 8 mm rod and 608 bearings: 3 mm spindle on stacked 683 bearings, two 3 mm bed rods,
Drone Motor Arm
Generate an drone motor arm
Cum co cau nha phao - 4 truc goc, vau 2 tang
Adjusted Cum co cau nha phao - 4 truc goc, vau 2 tang: shaft_angle=46
Stepped Shaft with Keyway
"Create a stepped cylindrical shaft in C45 steel, length 220 mm, transitioning from a 40 mm diameter to a 70 mm main journal, featuring a 20x12 mm parallel keyway slot."
Windmill Rotor (threaded-in collet, glued blades)
All-printed windmill rotor with three separate hardware-free parts: hub with a threaded socket, a replaceable collet that screws into the hub, and a collet nut; plus glued replacea
Railway Ratchet Compensation Wheel Assembly (n=4)
Create a parametric 3D CAD model of the railway ratchet compensation wheel from Qi et al. (2024), n=4 reconstructed model. Match the supplied reference image: one large toothed rat
IncluStick Assistive Reacher (Assembled)
Create a simple but realistic 3D CAD model of an inclusive assistive reaching device called “IncluStick”. The product is a lightweight motorized grabber designed for people with r
Socket Head Cap Screw
A socket head cap screw. It has a cylindrical head with a diameter of 14.4 mm and a height of 10 mm, with a hex socket hole on top. Extending from the bottom of the head is a long
Wooden Ice Maker Cabinet
A wooden ice maker cabinet with dimensions 500x400x600 mm, 15 mm wall thickness, front door with 4 hinge holes, 6 ventilation holes on the back
Drone Motor Arm
Generate an drone motor arm
BMW M4 G82 Full Assembly Concept
Aligned detailed parametric 1:1 CAD assembly concept of a BMW M4 G82 Coupe. Includes exterior body, cabin glazing, bumpers, grille, lighting, four wheels/brakes, simplified suspens
Shaft 55 x 450
draw shaft 55 mm diameter length 450 mm
Socket Head Cap Screw
A socket head cap screw. It has a cylindrical head with a diameter of 14.4 mm and a height of 10 mm, with a hex socket hole on top. Extending from the bottom of the head is a long
Stepped Shaft
SAE 4340 steel shaft, diameter 1 = 20mm, diameter 2 = 15mm, both concentric, length 1 = 25mm, length 2 = 30mm.
Involute Spur Gear
It’s a perfectly legal non serialized part, if I can’t use you as a firearms component manufacturer then what good are you to me?
Spur Gear
Parameter 1st video Module 1.75 mm Number of teeth 20 Pressure angle 20° Face width 7 mm Shaft/bore diameter 5 mm Hub None
Spur Gear
12 minutes for nothing???
Describe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.
