Mechanical parts
Socket Head Cap Screw
- Bounding box
- 14.4 × 14.4 × 78.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- October 11, 2026
Download
Free to download and use. See the terms.
The prompt
A socket head cap screw. It has a cylindrical head with a diameter of 14.4 mm and a height of 10 mm. Extending from the bottom of the head is a long cylindrical shaft with a diameter of 10.1 mm and a shaft length of 68 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Head Diameter | 14.4 mm | 8 – 25 |
| Head Height | 10 mm | 4 – 20 |
| Shaft Diameter | 10.1 mm | 4 – 16 |
| Shaft Length | 68 mm | 10 – 120 |
| Socket Hex Size (Across Flats) | 8 mm | 3 – 14 |
| Socket Depth | 5 mm | 1 – 9.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.